Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
21 Pages«<1617181920>»
Oven Error Codes
Options
Go to last post Go to first unread
Brand: -brand- Age: Less than 1 year
Previous Topic Next Topic
Tucson Alan  
#171 Posted : Wednesday, March 27, 2013 6:09:26 AM(UTC)
Tucson Alan

Rank: Member

Groups: Registered
Joined: 3/24/2013(UTC)
Posts: 7
Get F9 when using self clean only on top oven. Also fan in control module is inop. Door lock motor seems to continue to run until error code shuts down. Not sure if inop fan caused overheat of motor or it is just two separate issues. Oven works ok to cook but top module seems to get much hotter than we remember. Model PT956BM3BB GE
Back to top
Jbemom  
#172 Posted : Wednesday, March 27, 2013 11:42:08 AM(UTC)
Jbemom

Rank: Member

Groups: Registered
Joined: 3/27/2013(UTC)
Posts: 1
Hi,
I have a double electric wall oven. Model #GBD307PRS01. Serial #XT2210725. It flashed an error of F2 E6 on the display then went blank. I can press buttons and hear a double beep but nothing comes on the display screen anymore. The oven will not power on either. From reading the post on here it seems as though I need to replace the control panel. However, there are several parts to the control panel. Would you know what part #I should order? Also, is there a special place to order from other than Whirlpool?


Thanks for your help!
Back to top
johnnyhp  
#173 Posted : Wednesday, March 27, 2013 2:05:21 PM(UTC)
johnnyhp

Rank: Member

Groups: Registered
Joined: 3/27/2013(UTC)
Posts: 2
Getting F10 intermitently. I measured the Ohms on the sensor and its 1076 at room temperature. that seems to ne ok. How do I check the board or other sensor in the back?
Back to top
Gene  
#174 Posted : Wednesday, March 27, 2013 8:00:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hello Tucson Alan,

Would the cooling fan work in non-self-clean operation?

If it would not then check for 120 VAC to the motor while the control calls for heating in any mode.

Post the results.

Here are the breakdown diagrams and Parts for GE PT956BM3BB Wall Oven - AppliancePartsPros.com

Gene.
Back to top
Gene  
#175 Posted : Wednesday, March 27, 2013 8:06:34 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Jbemom Go to Quoted Post
Hi,
I have a double electric wall oven. Model #GBD307PRS01. Serial #XT2210725. It flashed an error of F2 E6 on the display then went blank. I can press buttons and hear a double beep but nothing comes on the display screen anymore. The oven will not power on either. From reading the post on here it seems as though I need to replace the control panel. However, there are several parts to the control panel. Would you know what part #I should order? Also, is there a special place to order from other than Whirlpool?


Thanks for your help!


Hi,

Most likely the problem is a bad control board (electronic part behind the control panel) but there is a small chance for the control panel (part with the keypad) to be bad as well. I would replace the control board first.

- The control board Part number: W10340941
Back to top
Gene  
#176 Posted : Wednesday, March 27, 2013 8:08:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: johnnyhp Go to Quoted Post
Getting F10 intermitently. I measured the Ohms on the sensor and its 1076 at room temperature. that seems to ne ok. How do I check the board or other sensor in the back?


Hi,

What is the complete model number of the oven?

Gene.
Back to top
johnnyhp  
#177 Posted : Thursday, March 28, 2013 4:52:21 AM(UTC)
johnnyhp

Rank: Member

Groups: Registered
Joined: 3/27/2013(UTC)
Posts: 2
Originally Posted by: Gene Go to Quoted Post
Hi,

What is the complete model number of the oven?

Gene.


790.96112408
Back to top
Gene  
#178 Posted : Thursday, March 28, 2013 2:22:57 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The "F10" error code means "Runaway temperature". Per your report the temperature sensor checks OK. So the solution is to replace the Electronic Oven Control (EOC). It is recommended to replace it together with the overlay because it's adhered to the EOC. If you need the correct part number for the overlay, post the color of it.

- The EOC Part number: 316557118
Part number: 316557118



Gene.
Back to top
Tucson Alan  
#179 Posted : Tuesday, April 2, 2013 7:41:14 PM(UTC)
Tucson Alan

Rank: Member

Groups: Registered
Joined: 3/24/2013(UTC)
Posts: 7
Voltage across Gray and w/r and w/b when oven on or self clean. No continuity though across fan leads
Back to top
Tucson Alan  
#180 Posted : Tuesday, April 2, 2013 7:43:24 PM(UTC)
Tucson Alan

Rank: Member

Groups: Registered
Joined: 3/24/2013(UTC)
Posts: 7
Originally Posted by: Gene Go to Quoted Post
Hello Tucson Alan,

Would the cooling fan work in non-self-clean operation?

If it would not then check for 120 VAC to the motor while the control calls for heating in any mode.

Post the results.

Here are the breakdown diagrams and Parts for GE PT956BM3BB Wall Oven - AppliancePartsPros.com

Gene.


Voltage across Gray and w/r and w/b when oven on or self clean. No continuity though across fan leads

Read more: http://forum.appliancepartspros...es-18.html#ixzz2PMtrILAY
http://forum.appliancepartspros.com
Back to top
Users browsing this topic
Guest (8)
Similar Topics
Thermador Oven error codes (Oven Repair (including Ranges and Cooktops))
by jblake9000 9/25/2015 9:01:34 AM(UTC)
Oven Error Codes & Won't Heat Fully (Oven Repair (including Ranges and Cooktops))
by davem68 4/18/2013 7:46:23 AM(UTC)
Whirlpool oven error codes (Oven Repair (including Ranges and Cooktops))
by ajsml 9/10/2012 10:21:53 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by fred jacoby 4/4/2012 9:44:17 AM(UTC)
Oven error codes (Oven Repair (including Ranges and Cooktops))
by sigman 3/23/2012 9:08:14 AM(UTC)
kENMORE OVEN ERROR CODES E3 FI (Oven Repair (including Ranges and Cooktops))
by chrisb361 12/11/2011 3:37:20 PM(UTC)
Whirlpool Electic oven error codes (Oven Repair (including Ranges and Cooktops))
by fcarrelli 9/7/2010 5:56:53 AM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:58:30 PM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:56:50 PM(UTC)
GE Oven error codes (Oven Repair (including Ranges and Cooktops))
by BobChurch 9/1/2009 4:51:40 PM(UTC)
GE oven error codes (Oven Repair (including Ranges and Cooktops))
by bdeinhardt@aol.com 6/25/2009 5:47:37 AM(UTC)
Whirlpool Double Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by alaucks 1/14/2009 9:31:27 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by cndybkr 9/29/2008 12:13:03 PM(UTC)
Additional Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by indydoug 11/15/2007 6:43:00 PM(UTC)
21 Pages«<1617181920>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET