Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
emidgette  
#1 Posted : Tuesday, June 1, 2010 4:56:50 PM(UTC)
emidgette

Rank: Member

Groups: Registered
Joined: 5/30/2010(UTC)
Posts: 2

I started the self-clean cycle but stopped it before it was completed. I tried it again the next day and got an F3 code and the pre-heat light was blinking. I turned off the circuit breaker and turned it back on. The next day I tried to use the oven (to cook, not to clean). It seemed to operate ok for a little while, but then it started beeping and I got an F2 code. The oven never got hot. Any suggestions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, June 2, 2010 3:54:30 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Was thanked: 10 time(s) in 10 post(s)
[COLOR="Red"]DUPLICATE[/COLOR]

Please see the following
http://forum.appliancepartspros...n-error-codes-f3-f2.html
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Similar Topics
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:58:30 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.