Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Kenmore Electric Range
Options
Go to last post Go to first unread
Model: 665.95022100 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
George Madden  
#1 Posted : Tuesday, November 22, 2011 9:19:12 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
The warning hot light will not go out at all on the small burner on the left rear.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
George Madden  
#2 Posted : Tuesday, November 22, 2011 9:20:24 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
The warning hot light will not go out at all on the left rear small burner.
Back to top
denman  
#3 Posted : Wednesday, November 23, 2011 2:54:17 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are the parts. Be sure to specify which burner is gone if you order from them.
Replacement parts for KENMORE 66595022100 | AppliancePartsPros.com

See the attachment for the tech sheet.

Sounds like the normally open side of the limiter on the element is shorted.
File Attachment(s):
95022100.pdf (342kb) downloaded 0 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
George Madden  
#4 Posted : Wednesday, November 23, 2011 3:57:58 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
Originally Posted by: denman Go to Quoted Post
Here are the parts. Be sure to specify which burner is gone if you order from them.
Replacement parts for KENMORE 66595022100 | AppliancePartsPros.com

See the attachment for the tech sheet.

Sounds like the normally open side of the limiter on the element is shorted.

Thanks very muvh for your help, today the light has gone out. Switch sticking?.
Back to top
denman  
#5 Posted : Wednesday, November 23, 2011 4:26:25 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="DarkRed"]Switch sticking?[/COLOR]
Yes that would be my guess.
Often when contacts go the start by pitting and eventually weld themselves together permanently.
Odds are that it will happen again, but you can never tell so perhaps the problem will never reappear.
I will keep my fingers crossed.
THIS FORUM IS DEAD!!!!!!!
Back to top
George Madden  
#6 Posted : Wednesday, November 23, 2011 4:30:22 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
Originally Posted by: denman Go to Quoted Post
Switch sticking?
Yes that would be my guess.
Often when contacts go the start by pitting and eventually weld themselves together permanently.
Odds are that it will happen again, but you can never tell so perhaps the problem will never reappear.
I will keep my fingers crossed.

Thanks again for your help. Is this switch built into the glass top burners or is it separate. I've had to replace a couple of the burner control Switches a couple years ago.
Back to top
denman  
#7 Posted : Wednesday, November 23, 2011 4:33:06 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="DarkRed"]Is this switch built into the glass top burners or is it separate.[/COLOR]
I believe it is built into the element assembly.
THIS FORUM IS DEAD!!!!!!!
Back to top
George Madden  
#8 Posted : Wednesday, November 23, 2011 4:38:16 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
Originally Posted by: denman Go to Quoted Post
Is this switch built into the glass top burners or is it separate.
I believe it is built into the element assembly.

Can the element be purchased separate from the glass top, I hope. Is it easy to change. Parts are expensive, almost time for a new stove.
Back to top
George Madden  
#9 Posted : Wednesday, November 23, 2011 4:52:03 AM(UTC)
George Madden

Rank: Member

Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
Denman has and is beiign a great help to us.
Back to top
denman  
#10 Posted : Wednesday, November 23, 2011 6:27:14 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes the elements can be purchased separately.
Installing them does take some time but is not that difficult once you figure out how to raise the oven to.
Just be sure to unplug the unit when working on it.
240 volts is lethal!!!

The unit is actually made by Whirlpool.
Here is a link to a site with lots of appliance manuals.
Download Manager - ApplianceDigest.com
You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer.

I do not have a Sears to Whirlpool cross reference so cannot be sure the following matches your unit.
That is why I gave the above link to the site. You may be able to figure out which manual matches you unit.

Here is the manual which I think may be close.
http://appliancedigest.com/index.php?/files/go/c1e3482d1a085c7409157d688afe864e/whirlpool-roper-estate-free-standing-electric-range-with-self-clean-service-manual
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Similar Topics
kenmore electric range 79097459802 (Oven Repair (including Ranges and Cooktops))
by Melissadimas 1/9/2022 9:07:08 PM(UTC)
Kenmore Electric Range power issue (Oven Repair (including Ranges and Cooktops))
by chrei 9/11/2020 5:31:55 PM(UTC)
Kenmore Electric Range (Oven Repair (including Ranges and Cooktops))
by avengers522 3/6/2018 9:23:37 PM(UTC)
Kenmore electric range clock will not stay on (Oven Repair (including Ranges and Cooktops))
by zooeyhall 11/7/2015 5:28:16 PM(UTC)
Kenmore Electric Range (Oven Repair (including Ranges and Cooktops))
by galensdad 10/1/2014 6:59:27 AM(UTC)
kenmore electric range wont heat (Oven Repair (including Ranges and Cooktops))
by tf78933 7/31/2014 2:44:42 PM(UTC)
Kenmore electric range oven not heating (Oven Repair (including Ranges and Cooktops))
by curtis1512 2/27/2014 2:07:20 PM(UTC)
kenmore electric range (Oven Repair (including Ranges and Cooktops))
by jeannieg 10/20/2013 8:27:41 PM(UTC)
Kenmore Electric Range doesn't reach temperature (Oven Repair (including Ranges and Cooktops))
by bilalian1 11/21/2012 12:13:39 PM(UTC)
Kenmore Electric Range (Oven Repair (including Ranges and Cooktops))
by wcarter 8/14/2012 1:22:25 PM(UTC)
Kenmore Electric Range wired wrong (Oven Repair (including Ranges and Cooktops))
by njranger 3/15/2012 5:06:28 PM(UTC)
Kenmore Electric Range - F10 Error (Oven Repair (including Ranges and Cooktops))
by blackwidow71 6/19/2011 3:02:24 PM(UTC)
Kenmore electric range. (Oven Repair (including Ranges and Cooktops))
by vns 1/11/2011 9:17:00 AM(UTC)
Kenmore Electric Range left element not workig (Oven Repair (including Ranges and Cooktops))
by Youjin 11/21/2009 7:39:48 PM(UTC)
Kenmore Electric Range: No Heat From Bake Or Broil Element (Oven Repair (including Ranges and Cooktops))
by john7 9/21/2009 3:42:34 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET