Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer won't run
Options
Go to last post Go to first unread
Model: LNC7764A71 Brand: Admiral Age: 5 - 10 years
Previous Topic Next Topic
SQP  
#1 Posted : Sunday, October 18, 2009 6:01:46 PM(UTC)
SQP

Rank: Member

Groups: Registered
Joined: 10/18/2009(UTC)
Posts: 2
When I push the start button nothing happens. There is no light inside the dryer either. I turned the fuse on and off an couple of times and no change.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Monday, October 19, 2009 4:26:23 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Check at the unit to be sure you have the correct power.
L1 to L2 should be 240 volts
L1 to Neutral and L2 to Neutral should be 120 volts.

Sounds like you have lost half the line as normally the motor and the light use the same side of the line.
The door switch is Normally Closed power to the light and Normally open power to the motor.
THIS FORUM IS DEAD!!!!!!!
Back to top
SQP  
#3 Posted : Sunday, October 25, 2009 11:14:39 PM(UTC)
SQP

Rank: Member

Groups: Registered
Joined: 10/18/2009(UTC)
Posts: 2
My husband checked the outlet and it's working correctly. The breaker is also working. The problem seems to be with the dryer.

Thank you so much for your time.
Back to top
denman  
#4 Posted : Monday, October 26, 2009 1:48:23 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Control panel replacement parts for ADMIRAL LNC7764A71 | AppliancePartsPros.com

I cannot find a wiring diagram for this unit. If you do not have it look in the control console, they like hiding it in there.

Try different settings/cycle types to see if it will start.
Though on most dryers the interior light is not wired through the timer, it is worth a shot.

Check that a wire has not burned off at the terminal strip in the machine.

Next check the door switch

After that check the thermal fuse on the heater.

Here is a good site with basic dryer help
http://www.applianceaid.com/dryers.html
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Similar Topics
Kenmore Elite dryer won't run... (Dryer Repair)
by J C Jones 9/11/2021 9:09:42 AM(UTC)
Kenmore Dryer won't run (Dryer Repair)
by gman536 3/14/2021 3:37:08 PM(UTC)
Dryer won't run unless start button is held down - no heat (Dryer Repair)
by jstrefeler 9/24/2017 12:10:11 PM(UTC)
Dryer WOn't Run (Dryer Repair)
by wstvpawjr13 5/14/2017 12:23:41 PM(UTC)
Dryer won't run after releasing the on button (Dryer Repair)
by Heathers1988 11/9/2016 4:20:53 PM(UTC)
Amana Dryer won't run (Dryer Repair)
by Paige Tremblay 1/26/2014 6:06:08 AM(UTC)
dryer won't run (Dryer Repair)
by dymetz62 1/8/2014 5:00:20 PM(UTC)
Dryer won't run (Dryer Repair)
by pmclaughlin@apins.com 4/9/2013 11:18:38 AM(UTC)
Dryer won't run (Dryer Repair)
by Ronald Walls 3/19/2013 1:09:09 PM(UTC)
Dryer won't run (Dryer Repair)
by Ronald Walls 3/19/2013 1:06:28 PM(UTC)
Dryer won't run (Dryer Repair)
by loumemoli 7/2/2012 1:33:54 PM(UTC)
dryer won't run but heats up fast (Dryer Repair)
by w. carroll 3/28/2012 8:22:26 AM(UTC)
Dryer Won't Run (Dryer Repair)
by paul888 1/16/2012 1:37:57 PM(UTC)
Dryer won't run after start. (Dryer Repair)
by clparks 4/28/2011 9:49:25 AM(UTC)
Dryer won't run (Dryer Repair)
by tterry 3/29/2011 10:49:47 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET