Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
Jim Hunt  
#1 Posted : Saturday, July 25, 2009 1:31:44 PM(UTC)
Jim Hunt

Rank: Member

Groups: Registered
Joined: 7/25/2009(UTC)
Posts: 6

How do I test the main board to see if it is bad. I have power to it. A new board cost $140 so I want to make sure the old one is bad before I buy a new one---Jim---
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Sunday, July 26, 2009 2:44:49 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If it is just dead, you might have a blown thermal fuse, a white plastic part that plugs into the control board.
Jim Hunt  
#3 Posted : Sunday, July 26, 2009 10:22:20 AM(UTC)
Jim Hunt

Rank: Member

Groups: Registered
Joined: 7/25/2009(UTC)
Posts: 6

I cheaked the fuse its ok
richappy  
#4 Posted : Sunday, July 26, 2009 11:50:02 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Seems like you need a new board.
Jim Hunt  
#5 Posted : Sunday, July 26, 2009 12:39:48 PM(UTC)
Jim Hunt

Rank: Member

Groups: Registered
Joined: 7/25/2009(UTC)
Posts: 6

how do I tell if the board that has the control buttons is bad? ;)
richappy  
#6 Posted : Sunday, July 26, 2009 3:19:10 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I assumed the control module did nothing, power to it and no function, is this correct?
Jim Hunt  
#7 Posted : Monday, July 27, 2009 4:22:05 PM(UTC)
Jim Hunt

Rank: Member

Groups: Registered
Joined: 7/25/2009(UTC)
Posts: 6

Yes. That's right. The control panel has no power. It dose not work.right .
richappy  
#8 Posted : Tuesday, July 28, 2009 2:13:17 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
So you measured voltage on the board side of the fuse, right.
Jim Hunt  
#9 Posted : Tuesday, July 28, 2009 5:45:33 AM(UTC)
Jim Hunt

Rank: Member

Groups: Registered
Joined: 7/25/2009(UTC)
Posts: 6

yes I have voltage to the board.
richappy  
#10 Posted : Tuesday, July 28, 2009 6:10:07 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
There is no other item that will cause the board not to work, except a missing power ground. If you measure voltage to the board and the other lead to power ground on the board, usually a white wire= new board time.
Users browsing this topic
Similar Topics
dish washer runs with doo open (Dishwasher Repair)
by Guest 4/17/2022 8:59:58 PM(UTC)
Dish washer not cleaning dishes KDTE204EPA1 (Dishwasher Repair)
by Guest 12/15/2021 7:24:01 AM(UTC)
correct orientation of plugs on ASKO D3122 anti flood microswitch. dish washer ? (Dishwasher Repair)
by turbo1600 8/20/2020 8:16:40 PM(UTC)
Whirlpool dish washer WDF110PABB2 Filling but not washing. (Dishwasher Repair)
by KG4MXV 6/15/2018 2:57:20 PM(UTC)
Kitchenaid dish washer leaking from below (Dishwasher Repair)
by chrysrobyn 12/19/2016 6:33:56 AM(UTC)
Dish washer stopped and want finish, all lights off (Dishwasher Repair)
by b.alford002@comcast.net 8/30/2015 11:17:11 AM(UTC)
How to replace motor bearings on Kitchen Aid KUDSO1FLSS1 dish washer (Dishwasher Repair)
by rajfixplumming 3/1/2014 10:33:52 AM(UTC)
Dish washer stops 14 Min in to cycle (Dishwasher Repair)
by Wayne_44 2/6/2014 4:55:37 PM(UTC)
Dish washer no lights on panel stopped mid cycle (Dishwasher Repair)
by 56Gomer 8/18/2013 6:34:28 AM(UTC)
dish washer (Dishwasher Repair)
by poloman 8/5/2013 9:38:22 AM(UTC)
dish washer (Dishwasher Repair)
by poloman 8/5/2013 9:34:27 AM(UTC)
Dish Washer (Dishwasher Repair)
by jobronie 7/25/2013 3:42:51 PM(UTC)
dish washer (Dishwasher Repair)
by everettwayne 6/19/2013 8:19:55 AM(UTC)
Dish washer won't dispense water. (Dishwasher Repair)
by Tom Loszchuk 4/2/2013 5:52:22 PM(UTC)
GE Dish Washer Stops midcycle (Dishwasher Repair)
by mwpresnell 2/8/2013 8:41:24 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.