Rank: Member
Groups: Registered
Joined: 4/9/2008(UTC)
Posts: 3
|
I need to locate an exploded diagram and instructions to open the cabinet to clean lint from the inside of the dryer. Can anyone help?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
I'm not familiar with this model. Maybe someone else on the forum can help you better.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/25/2008(UTC)
Posts: 2
|
Hi: I have the FD 8410 so it's probably similar.
1) disconnect the power
2) There are about 30 star head screws on the back. Most of them hold the back panel in place. However there are four or five that do not. You can tell them apart because the metal sections they hol appear to be underneath the main panel.
3) You may have to remove the cover over the electrical connection to remove the panel.
4) Remove the screws and electrical conenction cover.
5)There are two screws near the top of the back edge that hold the top on.
6) Remove those two and raise the lid ... about 2/3 of lid will come off .
7) Remove back panel and you can access most of the dust surfaces
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
