Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

21 Pages<12345>»
Options
Go to last post Go to first unread
Gene  
#21 Posted : Monday, March 10, 2008 3:32:10 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Hi SMIMS,

In order to provide most accurate advise I need the complete model number of the range.

Gene.
Jane DeGroat  
#22 Posted : Monday, April 28, 2008 4:51:12 PM(UTC)
Jane DeGroat

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 2

I have a Thermador Model GSC30CVWC used range just hooked it up , oven will not work flashing F3 error code
aj3  
#23 Posted : Wednesday, April 30, 2008 8:27:19 AM(UTC)
aj3

Rank: Member

Groups: Registered
Joined: 4/30/2008(UTC)
Posts: 1

Oven (GE Profile Double Oven Model #JTP56W0D1WW)had not used for 10 days and it developed an F7 error code that does not allow any of the keypad to be used. Clock still works fine. I have tried hitting Clear/Off key and powering down the oven but code comes back.
Any thoughts on how to fix this?
Thanks
aj
Gene  
#24 Posted : Wednesday, April 30, 2008 2:15:41 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

aj,

The problem with your oven caused by one or more stuck pads on the control panel.

- The part number for the control panel (white) is AP3160621

Here are the break down diagrams for the GE oven Model JTP56WD1WW

Gene.
Gene  
#25 Posted : Wednesday, April 30, 2008 5:02:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Jane,

The "F3" error code means the oven temperature sensor (#14 on the break down diagram) is "open".

Locate the sensor plug at the control board and measure the sensor resistance. It suppose to be about 1100 Ohms at the room temperature.

If the reading is wrong then you have to pull the range, remove the rear cover and measure the sensor resistance at the sensor plug.

If the reading is wrong - replace the oven temperature sensor.

If the reading is correct - check the wire harness.

If the sensor resistance at the control board is correct then check the plug and if there is nothing wrong - the control board has to be replaced.

- The part number for the oven temperature sensor is AP2831584

The control board (aka clock) is no longer available.

Here are the break down diagrams for the Thermador range Model GSC30CVWC

Gene.
todmngd  
#26 Posted : Monday, June 30, 2008 7:19:57 PM(UTC)
todmngd

Rank: Member

Groups: Registered
Joined: 6/30/2008(UTC)
Posts: 1

My stove continuously flashes F10 as the oven heats up. Sears repair said it was a bad display. I personnally didn't think this was right but they are supposed to be the experts. I cannot find the error codes for my model of stove 790.36679400. I beleive it is a run away temp. Because after the stove is off the code will continue to appear. Any thoughts on this is greatly appreciated.
aulfgar  
#27 Posted : Friday, July 4, 2008 9:57:40 PM(UTC)
aulfgar

Rank: Member

Groups: Registered
Joined: 7/4/2008(UTC)
Posts: 1

I think this question was answered already, but does F2 mean a runaway temperature sensed for a Kenmore Classic Grille? I would give the model number or appliance number but I can't seem to find it, it is very old however looks like mid 70's decor.
Gene  
#28 Posted : Saturday, July 5, 2008 7:28:53 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

todmngd,

If the "F10" appears while the range is in "time of the day" mode then the problem is a bad EOC.

If it appears in the "cook" mode then the oven temperature sensor has to be checked first. It could be a bad wire harness and/or sensor plug.

- The part number for the EOC is AP3790798

- The part number for the oven sensor is AP3363354

Gene.
Gene  
#29 Posted : Saturday, July 5, 2008 7:31:46 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

aulfgar,

You are right, "F2" error code on older models means "runaway temperature".

Gene.
w2002s  
#30 Posted : Sunday, July 20, 2008 12:28:18 PM(UTC)
w2002s

Rank: Member

Groups: Registered
Joined: 1/14/2008(UTC)
Posts: 8

I replace the clock timer on my frigidare wall oven ,the clock work . the buttom works , but no power to the elements
Users browsing this topic
Similar Topics
Thermador Oven error codes (Oven Repair (including Ranges and Cooktops))
by jblake9000 9/25/2015 12:01:34 PM(UTC)
Oven Error Codes & Won't Heat Fully (Oven Repair (including Ranges and Cooktops))
by davem68 4/18/2013 10:46:23 AM(UTC)
Whirlpool oven error codes (Oven Repair (including Ranges and Cooktops))
by ajsml 9/10/2012 1:21:53 PM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by fred jacoby 4/4/2012 12:44:17 PM(UTC)
Oven error codes (Oven Repair (including Ranges and Cooktops))
by sigman 3/23/2012 12:08:14 PM(UTC)
kENMORE OVEN ERROR CODES E3 FI (Oven Repair (including Ranges and Cooktops))
by chrisb361 12/11/2011 6:37:20 PM(UTC)
Whirlpool Electic oven error codes (Oven Repair (including Ranges and Cooktops))
by fcarrelli 9/7/2010 8:56:53 AM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 7:58:30 PM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 7:56:50 PM(UTC)
GE Oven error codes (Oven Repair (including Ranges and Cooktops))
by BobChurch 9/1/2009 7:51:40 PM(UTC)
GE oven error codes (Oven Repair (including Ranges and Cooktops))
by bdeinhardt@aol.com 6/25/2009 8:47:37 AM(UTC)
Whirlpool Double Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by alaucks 1/14/2009 12:31:27 PM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by cndybkr 9/29/2008 3:13:03 PM(UTC)
Additional Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by indydoug 11/15/2007 9:43:00 PM(UTC)
21 Pages<12345>»
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.