Rank: Member
Groups: Registered
Joined: 3/1/2009(UTC)
Posts: 3
|
Gas range approx. 15 years old. The display fades out so it can't be read. It has happened for many years. Previously you could tap on the area around the display & it would light up, but then faded again. Recently, tapping doesn't work. I think we need to replace something; what part/parts do we need?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
|
You need to replace the clock control board. I would be able to give you a part #, but you are missing a letter and a # at the end. Tom
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/1/2009(UTC)
Posts: 3
|
Originally Posted by: kayakcrzy  You need to replace the clock control board. I would be able to give you a part #, but you are missing a letter and a # at the end. Tom The model # from the stove is JGBP26GEN1WG Hope this helps and thank you.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
|
I have checked 5 different parts sites for your model #, and none are coming up. The best thing you can do is to call GE, and see if they can help you get a part#. Tom ApplianceEducator.com
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
