Rank: Member
Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 7
|
I have a 2yr old Kenmore top load Hi efficient washer that recently started making loud sounds during its operation. It sounds like the bearings or something are going. the sound is quite loud. Im wondering if this problem is worth repairing.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Need the correct model number. There should be a label somewhere with model number and serial number. May be under lid.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 7
|
Originally Posted by: fairbank56  Need the correct model number. There should be a label somewhere with model number and serial number. May be under lid.
Eric Model # 10.2130202 ser# C14031865 I just moved out washer to look inside. Directly under the center of the machine there was a "pile" of black debris looking like some kind of remnants from the "grinding" sound I was hearing.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Still missing numbers in that model number. Should be 11 numbers.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 7
|
Originally Posted by: fairbank56 Still missing numbers in that model number. Should be 11 numbers.
Eric I rechecked # 110.21302012 Model Type 588.10
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Ok, probably a loose nut on the main drive pulley has allowed the pulley to drop and the belt is rubbing on the belt guard. Tilt the washer back. There may be a sound dampener to remove, then remove the belt guard and check that nut. If loose, apply some Loctite blue 242 threadlocker to the threads before retightening. You may need to replace the belt if it's torn up badly.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 7
|
Originally Posted by: fairbank56 Ok, probably a loose nut on the main drive pulley has allowed the pulley to drop and the belt is rubbing on the belt guard. Tilt the washer back. There may be a sound dampener to remove, then remove the belt guard and check that nut. If loose, apply some Loctite blue 242 threadlocker to the threads before retightening. You may need to replace the belt if it's torn up badly.
Eric Hey, I do appreciate your help on a Sunday morning. This is my own washer here too giving me trouble. Ill give a look. Thanks again!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 7
|
Originally Posted by: fairbank56 Ok, probably a loose nut on the main drive pulley has allowed the pulley to drop and the belt is rubbing on the belt guard. Tilt the washer back. There may be a sound dampener to remove, then remove the belt guard and check that nut. If loose, apply some Loctite blue 242 threadlocker to the threads before retightening. You may need to replace the belt if it's torn up badly.
Eric Hey Eric, You hit it on the washer problem! In process of repair right now. Another thing to pass by you if you would. I have a Whirlpool side by side refrige/freezer. Model # ED5PHEXRTOO Serial # SS0762317 I recently replaced the door cam on the refridge side (right side). I ordered actual whirlpool cams and installed them. Now, ever since, when you open and close the door it make a loud "click" sound when the door opens or is about all way closed. The parts I removed were worn and the new ones seem the exact same kind. Now I see the two pieces ride on each other, but the originals never made noise. Any ideas?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
