The numbers you posted not even close to a valid error codes listed in the Tech sheet.

The first thing I would do is measure the voltage at the range wall outlet and at the control board. It suppose to be 240 VAC at the outlet and 120 VAC between P4-1 (white wire) and P4-3 (black wire). Make sure the black wire is hot and the white wire is neutral.

If the voltage reads OK, try to set the clock and use the Bake and Broil. Post the results.

Gene.

When your oven is flashing an error code, it usually means something specific, for example F3 usually stands for a faulty oven sensor. To help you identify what each code means, we have put together a list of oven error codes (or fault codes, as they're called). Once you know which component has failed, simply enter your appliance model number in our part search, find and order the part, and we'll take it from there. If it says that your part is in stock, you can expect to get it in just a few days, usually within 1-2 business days.

F1 error code usually means that either the touch pad or the clock (ERC) is bad. It's simple if your model incorporates both as a single assembly - replace the clock/touch pad, problem's solved. But, when the touch pad is a separate component from the clock, how do you tell which of the two has failed, without having to replace both? Well, we have a simple test that can show you whether it's the clock (ERC) or the touch pad (membrane switch) that needs to be replaced. The test is available on the error code page right below the list of brands.

If you have additional questions, please click on the "POST NEW TOPIC" button on the previous page to post your question.

I have a whirlpool slide in stove with the accubake sstem about 5 years old. The control panel displays PF . I had a repair man look at it and said I need a new panel , $300 + some $ .He also said I can install one my self if I can find the part. Where can I find this part and is it called a control panel sensor?