2 Pages12> Go to Page...

Washer Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SAV5401AWW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

Ramos		#1 Posted : Monday, May 19, 2008 9:23:48 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		I would like some help is being able to tighten the spin belt on this magtag washer, can some one please help
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

ApplianceJunk		#2 Posted : Monday, May 19, 2008 10:06:12 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Hi, The idler wheel is self adjusting. There is no way to tighten the belt.
User Profile View All Posts by User View Thanks

richappy		#3 Posted : Monday, May 19, 2008 1:31:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I would remove the belt and turn the transmission pulley both ways to see if one direction is tight, if ok, check the pump for bad bearings. If everything ok, just replace the belt.
User Profile View All Posts by User View Thanks

Ramos		#4 Posted : Tuesday, May 20, 2008 8:52:03 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		Thanks for your help yesterday, I did see that there is not way to adjust the belt, also, I what I found was that the pulley wheel was at the bottom of the cabinet. My question is there some way to fasten the pulley wheel to the pulley lever? I managed to get the pulley wheel back in place but it will not stay there on it's own. Thanks again for your help Ramos
User Profile View All Posts by User View Thanks

Ramos		#5 Posted : Tuesday, May 20, 2008 9:42:30 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		thanks for you help, can you tell me if there is a way to fasten the pulley wheel to the lever idler arm?? Again thanks for all the help. Ramos
User Profile View All Posts by User View Thanks

Ramos		#6 Posted : Tuesday, May 20, 2008 9:43:54 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		thanks again, I need to know if there is a way to fasten the pulley wheel to the lever idler arm?? Ramos
User Profile View All Posts by User View Thanks

Ramos		#7 Posted : Tuesday, May 20, 2008 9:57:08 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		Iam not sure if you are getting my replies. I would like to know if there is a way to fasten the pulley wheel to the lever idler arm. I found the pulley wheel on the bottom of the cabinet, put it back in the lever idler arm but I am not sure if it will stay with out some way to fasten it. Thanks for you kindly help. Ramos
User Profile View All Posts by User View Thanks

richappy		#8 Posted : Tuesday, May 20, 2008 10:49:51 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		The "C" clip/retainer ring may have popped off the idler shaft, just look for it, or the pulley may be bad. C clip part # 23748, pulley part # 40045001
User Profile View All Posts by User View Thanks

Ramos		#9 Posted : Wednesday, May 21, 2008 8:42:52 AM(UTC)
Rank: Member Groups: Registered Joined: 5/19/2008(UTC) Posts: 6		thanks again, I will look for the the c retainer.. If not I may have to order one Ramos
User Profile View All Posts by User View Thanks

budney		#10 Posted : Thursday, October 2, 2008 7:13:15 AM(UTC)
Rank: Member Groups: Registered Joined: 10/2/2008(UTC) Posts: 1		My neptune washer model MAH3000AWW makes a high pitch whirling sound during the final spin cycle. I think the bearing for the inner tub is going bad but I can not find a bearing on your parts breakdown. Thanks russ rlney@msn.com
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)

Similar Topics

Older Msytag top load washer main belt tension on model LA612 (Washer Repair) by Guest 6/29/2024 10:22:44 AM(UTC)

Frigidaire dishwasher code A (Dishwasher Repair) by Evandtam 6/27/2024 5:11:41 PM(UTC)

GE Top load washer not draining (Washer Repair) by Guest 6/25/2024 4:59:12 PM(UTC)

Washer won’t spin with load (Washer Repair) by Guest 6/25/2024 5:32:07 AM(UTC)

Samsung Top Load Washer (Washer Repair) by welchjames65@hotmail.com 6/21/2024 3:08:07 PM(UTC)

Fisher Paykel Drawer Dishwasher will not Lock (Dishwasher Repair) by thompsdw 6/17/2024 7:34:54 AM(UTC)

GFQ14 - Combination Washer / Condenser Dryer GFQ14ESSN0WW (Dryer Repair) by SoakingWet 6/13/2024 10:48:53 AM(UTC)

GE Profile Washer not draining and water not hot (Dishwasher Repair) by Guest 6/8/2024 9:00:21 AM(UTC)

Kenmore washer 110.81821110 (Washer Repair) by Hitzemup 6/5/2024 3:57:12 PM(UTC)

LG Washer 0E (OE) Error After Pump Motor Replaced (Solved) (Washer Repair) by kilimar 6/3/2024 2:34:22 PM(UTC)

Whirlpool duet washer front load (Washer Repair) by Guest 6/3/2024 9:57:09 AM(UTC)

Kenmore 70 series washer grinding (Washer Repair) by Higginsdog 5/28/2024 4:17:38 AM(UTC)

Dishwasher won't work. (Dishwasher Repair) by Guest 5/23/2024 6:32:18 PM(UTC)

Kenmore 90 Series top-loader washer won't agitate/drain/spin (fixed?) and makes metallic noise (Washer Repair) by deepdiver359 5/21/2024 8:09:21 PM(UTC)

GE washer grinding noise (Washer Repair) by gefixin 5/20/2024 2:01:39 PM(UTC)

2 Pages12> Go to Page...