2 Pages<12 Go to Page...

Washer Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SAV5401AWW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

libertyappl		#11 Posted : Thursday, October 2, 2008 8:34:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		budney, If it's a whirling sound check all the little holes inside the tub for anything that may be stuck in a hole(like a nail, screw, bra wire, etc....) You will probably want to use a flash light to look. May get lucky and that's all it is. Nat
User Profile View All Posts by User View Thanks

chengsr		#12 Posted : Monday, February 2, 2009 10:29:59 AM(UTC)
Rank: Member Groups: Registered Joined: 2/2/2009(UTC) Posts: 5		I had the tub replaced 3 years ago and lately during the final spin cycle a loud noise occurs and only during the final spin cycle. Is it possible that the strut is going bad?
User Profile View All Posts by User View Thanks

richappy		#13 Posted : Monday, February 2, 2009 1:47:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Is it a bearing noise, or a thumping sound.
User Profile View All Posts by User View Thanks

chengsr		#14 Posted : Monday, February 2, 2009 5:05:55 PM(UTC)
Rank: Member Groups: Registered Joined: 2/2/2009(UTC) Posts: 5		It starts with a 2 or 3 thump and then it turns into a bearing noise, I guess I answer my own question?
User Profile View All Posts by User View Thanks

richappy		#15 Posted : Tuesday, February 3, 2009 12:32:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I would pull the bottom front panel and check for a busted shock. Also, if you have an amprobe, check the total current into the washer at the power plug. If the current draw in high speed spin is getting near 3 amps, your speed control board/motor will fail soon with continued running.
User Profile View All Posts by User View Thanks

chengsr		#16 Posted : Tuesday, February 3, 2009 5:27:59 AM(UTC)
Rank: Member Groups: Registered Joined: 2/2/2009(UTC) Posts: 5		Thanks, I had the inner tub, motor and motor controlbroard replace 3 years ago just wondering if there is any warranty on Magtag OEM parts.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

Similar Topics

Older Msytag top load washer main belt tension on model LA612 (Washer Repair) by Guest 6/29/2024 10:22:44 AM(UTC)

Frigidaire dishwasher code A (Dishwasher Repair) by Evandtam 6/27/2024 5:11:41 PM(UTC)

GE Top load washer not draining (Washer Repair) by Guest 6/25/2024 4:59:12 PM(UTC)

Washer won’t spin with load (Washer Repair) by Guest 6/25/2024 5:32:07 AM(UTC)

Samsung Top Load Washer (Washer Repair) by welchjames65@hotmail.com 6/21/2024 3:08:07 PM(UTC)

Fisher Paykel Drawer Dishwasher will not Lock (Dishwasher Repair) by thompsdw 6/17/2024 7:34:54 AM(UTC)

GFQ14 - Combination Washer / Condenser Dryer GFQ14ESSN0WW (Dryer Repair) by SoakingWet 6/13/2024 10:48:53 AM(UTC)

GE Profile Washer not draining and water not hot (Dishwasher Repair) by Guest 6/8/2024 9:00:21 AM(UTC)

Kenmore washer 110.81821110 (Washer Repair) by Hitzemup 6/5/2024 3:57:12 PM(UTC)

LG Washer 0E (OE) Error After Pump Motor Replaced (Solved) (Washer Repair) by kilimar 6/3/2024 2:34:22 PM(UTC)

Whirlpool duet washer front load (Washer Repair) by Guest 6/3/2024 9:57:09 AM(UTC)

Kenmore 70 series washer grinding (Washer Repair) by Higginsdog 5/28/2024 4:17:38 AM(UTC)

Dishwasher won't work. (Dishwasher Repair) by Guest 5/23/2024 6:32:18 PM(UTC)

Kenmore 90 Series top-loader washer won't agitate/drain/spin (fixed?) and makes metallic noise (Washer Repair) by deepdiver359 5/21/2024 8:09:21 PM(UTC)

GE washer grinding noise (Washer Repair) by gefixin 5/20/2024 2:01:39 PM(UTC)

2 Pages<12 Go to Page...