Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
No hot water
Options
Go to last post Go to first unread
Model: GTWN5050M0WS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
arylisrandy  
#1 Posted : Sunday, October 20, 2013 1:35:09 PM(UTC)
Quote
arylisrandy

Rank: Member

Groups: Registered
Joined: 10/20/2013(UTC)
Posts: 2
When Hot temp is selected and the washer starts to fill, hot water comes into the machine for about 30 seconds then it clicks over to cold water. The hot water never comes back on and I get a tub full of cold water. I replaced the Valve Triple Water OEM (part number AP4412517) and the same thing continues to happen. I was told it was likely the Water Temp Sensor. Any other suggestions? Is there a way to test the sensor before I replace the entire board?

Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Sunday, October 20, 2013 3:36:38 PM(UTC)
Quote
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
The sensor is not part of the control board, it fits into the water fill funnel. Are you filling the washer with the lid open? As a safety feature, most of these washers with electronic control will not switch from cold or warm to hot with the lid open.

GE WH12X10410 Probe Sensor Atc - AppliancePartsPros.com

Eric
Back to top
arylisrandy  
#3 Posted : Monday, October 21, 2013 2:19:08 PM(UTC)
Quote
arylisrandy

Rank: Member

Groups: Registered
Joined: 10/20/2013(UTC)
Posts: 2
Originally Posted by: fairbank56 Go to Quoted Post
The sensor is not part of the control board, it fits into the water fill funnel. Are you filling the washer with the lid open? As a safety feature, most of these washers with electronic control will not switch from cold or warm to hot with the lid open.

GE WH12X10410 Probe Sensor Atc - AppliancePartsPros.com

Eric


Thanks Eric. I haven't been opening the lid when filling. I'll try replacing the sensor.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
No Hot Water in Whirlpool Washer (Washer Repair)
by Billpa2023 1/4/2023 12:12:44 PM(UTC)
No hot water (Washer Repair)
by scv1 12/29/2015 7:41:39 PM(UTC)
No hot water (Washer Repair)
by scv1 12/29/2015 7:39:54 PM(UTC)
No Hot Water Coming From Inlet Valve (Washer Repair)
by sophialh74 10/17/2014 5:37:11 AM(UTC)
No hot water in Maytag washer (Washer Repair)
by Pastaronie 8/16/2014 12:29:47 PM(UTC)
No Hot Water in Washer (Washer Repair)
by Obuasi 2/8/2013 4:30:18 AM(UTC)
No Hot water (Washer Repair)
by jeschw 8/5/2012 6:19:05 AM(UTC)
No Hot Water Coming Into Washer (Washer Repair)
by chloed 2/7/2012 8:08:03 AM(UTC)
No hot water (Washer Repair)
by lindaa 12/8/2011 3:39:17 PM(UTC)
maytag washer no hot water (Washer Repair)
by lindaa 12/7/2011 11:18:26 AM(UTC)
Whirlpool dishwasher has no hot water or heat for drying (Dishwasher Repair)
by ford2953 6/27/2011 5:10:33 PM(UTC)
Whirlpool Washer - No Hot Water (Washer Repair)
by jeff mitchell 5/20/2011 8:43:32 PM(UTC)
No hot water (Washer Repair)
by amayesin 4/30/2011 4:03:38 AM(UTC)
Frigidaire Washer - No Hot Water (Washer Repair)
by cdWJordan 4/8/2011 12:52:49 PM(UTC)
Bosch dishwasher no hot water (Dishwasher Repair)
by samsrc 2/15/2011 7:46:00 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET