Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages<12
New Topic Post Reply
Options
Go to last post Go to first unread
eisehunter  
#11 Posted : Sunday, June 2, 2013 1:14:59 PM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

So from L1 to 4M you got 0 ohms but from L1 to 5M it was infinite ohms.
Is this correct? Yes.

bad motor, ok, thanks for all your help
eisehunter  
#12 Posted : Sunday, June 2, 2013 1:15:11 PM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

So from L1 to 4M you got 0 ohms but from L1 to 5M it was infinite ohms.
Is this correct? Yes.

bad motor, ok, thanks for all your help
eisehunter  
#13 Posted : Tuesday, June 4, 2013 4:36:22 PM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

Which two lead/terminals on the motor to apply 120v directly to check when motor disconnected from dryer?
denman  
#14 Posted : Tuesday, June 4, 2013 11:00:49 PM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
4M to 5M

These connect in the start and main (run)windings.
When the motor gets close to operating speed the centrifugal switch opens.
Disconnecting the start winding but leaving the main winding in circuit.
THIS FORUM IS DEAD!!!!!!!
eisehunter  
#15 Posted : Wednesday, June 5, 2013 7:43:35 AM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

So 4m ground and 5m 120V?
denman  
#16 Posted : Wednesday, June 5, 2013 8:17:02 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Polarity does not matter.
THIS FORUM IS DEAD!!!!!!!
eisehunter  
#17 Posted : Sunday, June 9, 2013 11:26:48 AM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

Put power directly to 4m and 5m and motor works fine. Hooked back up motor to dryer harness and won't start. Must be timer?
eisehunter  
#18 Posted : Sunday, June 9, 2013 11:38:22 AM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

Put power directly to 4m and 5m and motor works fine, hook back up dryer wiring harness and it wont start, thinking bad timer?
denman  
#19 Posted : Sunday, June 9, 2013 12:46:06 PM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Could be the timer.

I do not understand what is going on here as your meter readings showed the motor as an open circuit.
THIS FORUM IS DEAD!!!!!!!
eisehunter  
#20 Posted : Sunday, June 30, 2013 8:27:26 AM(UTC)
Quote
eisehunter

Rank: Member

Groups: Registered
Joined: 5/28/2013(UTC)
Posts: 13

Changed timer, solved the problem. Excellent start circuit checkout directions.

Thanks!!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Whirlpool electric dryer m#ler4631bq1 (Dryer Repair)
by Guest 6/8/2022 5:45:29 AM(UTC)
Whirlpool electric dryer trouble (Dryer Repair)
by sometime fixer 9/26/2018 9:11:22 AM(UTC)
Whirlpool electric dryer heating safety issues (Dryer Repair)
by Pirate111 10/8/2017 9:57:09 AM(UTC)
wHIRLPOOL eLECTRIC dRYER (Dryer Repair)
by jjmoore 3/21/2015 9:53:19 AM(UTC)
Old whirlpool electric dryer won't start (Dryer Repair)
by era300 1/22/2015 9:10:42 AM(UTC)
whirlpool electric dryer (Dryer Repair)
by ajlgap19 6/6/2014 9:55:32 AM(UTC)
Whirlpool Electric Dryer not stopping and not heating (Dryer Repair)
by rschunk 1/23/2014 7:03:27 PM(UTC)
Whirlpool Electric Dryer Issues (Dryer Repair)
by samedpaul 1/16/2014 9:02:04 AM(UTC)
Whirlpool Electric Dryer No Heat (Dryer Repair)
by ahrjmrecr 10/30/2013 2:38:30 PM(UTC)
Whirlpool Electric Dryer - Runs- No Heat! (Dryer Repair)
by Steveorageous 2/6/2013 12:59:47 PM(UTC)
Whirlpool Electric Dryer (Dryer Repair)
by mayork 11/14/2012 10:21:04 AM(UTC)
Whirlpool Electric Dryer, replaced timer, will not advance (Dryer Repair)
by muttonchop 9/10/2012 2:08:11 PM(UTC)
Whirlpool Electric Dryer not getting hot (Dryer Repair)
by jonrob65 8/20/2012 12:48:36 PM(UTC)
Whirlpool Electric Dryer heating on Air Only (Dryer Repair)
by quigleybmd 8/18/2012 1:10:17 PM(UTC)
Whirlpool electric dryer too hot (Dryer Repair)
by Fixnitmyself 5/16/2012 12:36:00 PM(UTC)
2 Pages<12
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.