Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Electrical problem
Options
Go to last post Go to first unread
Model: WCSE4160B2WW Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
hb6306  
#1 Posted : Thursday, September 10, 2009 12:55:10 PM(UTC)
hb6306

Rank: Member

Groups: Registered
Joined: 9/10/2009(UTC)
Posts: 2
I replaced the electrical control unit. After plugging in, all the LED's light up and blink. How do I reset the electronics?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Sunday, September 13, 2009 5:30:57 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
GE does not allow anyone outside of GE to have access to its tech info so I do not know if there is a reset procedure.

There should be technical information inside the console there. If that does not tell you, or if the info is missing I can only suggest you contact GE and see if they can hellp you.

Sorry not to be more helplful. Good luck.
Back to top
applianceman  
#3 Posted : Sunday, September 13, 2009 7:09:03 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
I am assuming you replace the control panel correct?

If so on the old control you have a plug with just a jumper wire. Often people will leave this plug off because the wires don’t connect to anything on the washer. This is the model select plug and if it is not installed on the new control all it will do is blink the lights. Hope this helps!

Clothes Washer Repair Guide
Back to top
hb6306  
#4 Posted : Tuesday, September 15, 2009 6:57:30 AM(UTC)
hb6306

Rank: Member

Groups: Registered
Joined: 9/10/2009(UTC)
Posts: 2
Originally Posted by: applianceman Go to Quoted Post
I am assuming you replace the control panel correct?

If so on the old control you have a plug with just a jumper wire. Often people will leave this plug off because the wires don’t connect to anything on the washer. This is the model select plug and if it is not installed on the new control all it will do is blink the lights. Hope this helps!

Clothes Washer Repair Guide
:) I did replace the control panel, and you are absolutely right. Thanks!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Possible dryer electrical problem (Dryer Repair)
by Dmillbhawk 8/1/2013 10:43:43 AM(UTC)
Do I have electrical problem? Soap dispenser? (Dishwasher Repair)
by roger20 3/13/2012 3:42:47 PM(UTC)
electrical problem (Oven Repair (including Ranges and Cooktops))
by robertwgeorge 2/9/2012 6:44:19 PM(UTC)
electrical problem (Washer Repair)
by garycart 4/4/2011 4:57:29 PM(UTC)
Electrical problem (Dishwasher Repair)
by capndavid2001 8/31/2010 6:08:08 AM(UTC)
Maytag Dryer - first noise, now also electrical problem (Dryer Repair)
by RobBroekhuis 11/7/2009 2:23:58 PM(UTC)
Icemaker front panel electrical problem (Refrigerator & Freezer Repair)
by ttvor 6/20/2009 2:10:55 PM(UTC)
Electrical Problem (Garbage Disposer Repair)
by Debra Carlin 11/15/2008 6:04:36 PM(UTC)
Electrical problem (Refrigerator & Freezer Repair)
by mcbdallas 2/19/2008 11:27:42 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET