Rank: Member
Groups: Registered
Joined: 1/3/2008(UTC)
Posts: 16
|
How to change the Pump and Motor on my Kenmore Dishwasher. Could you kindly give me the Tech page for my particular model. I have already purchased the Pump & Motor from Appliance Parts Pro company, They are great to deal with.
Goerge M
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
You have a Whirlpool dishwasher, Kenmore name. Basically, you will need to pull the dishwasher out to replace the motor. You will need to pull the upper pump housing and the half round pump cover and replace the chopper assy. p#8268383 and the check valve P#8268375 located in the pump housing next to the chopper.This will prevent chopper clogs. You can go to www.applianceaid.com for specifics. You can return any unused parts if you don't need them. The choppers on these tend to clog up, might be your only problem!!
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
