Rank: Member
Groups: Registered
Joined: 12/23/2007(UTC)
Posts: 1
|
dryer will tumble but won't heat. I've checked continuity at all thermal fuses, outlet supply, blower thermal , safety thermos and they all test good. Also tested the timer and heat switches and they appear good. So I finally was able to test the leads on the heating element. (no continuity) Bingo! Next problem is how do I get element out ? Having a hard time getting the drum out. I have removed the drum belt but am having a problem lifting it out do to catching on the front drum sliders...
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
|
You must take the front panel off and slide the drum out the front. The back of the drum has a bearing assembly that will need to be lifted up about an inch before it can be removed. Look for screws and clips holding the front panel on. Once the drum is out, the element will be on the back bulkhead.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
