Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Ron S  
#1 Posted : Sunday, November 30, 2008 1:28:06 PM(UTC)
Ron S

Rank: Member

Groups: Registered
Joined: 11/30/2008(UTC)
Posts: 1

My gas dryer will not heat up but the drum will turn. no lint and the vent is clear.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Monday, December 1, 2008 4:14:18 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Take a look and see if the glow coil comes on. If not, take the back off the dryer, and you will see a part about an inch and a half long, by a half inch wide, and it is white in color. That is the thermal fuse. Make sure the dryer is unplugged, and take the 2 wires off the thermal fuse, and put the terminal ends together, and put a little tape on it, so it does not hit metal, and then see if it works. If it does, DO NOT RUN the dryer that way. That thermal fuse is the only thing stopping that dryer from burning down the house. If it does not work it will either be the ignitor or the flame sensor. Tom ApplianceEducator.com
paul armbruster  
#3 Posted : Wednesday, December 3, 2008 8:11:21 PM(UTC)
paul armbruster

Rank: Member

Groups: Registered
Joined: 12/3/2008(UTC)
Posts: 1

I have a Kenmore dryer with the same symptom and used your troubleshooting tip to fix it. Thank you. Paul A.
dirtguy150  
#4 Posted : Sunday, January 18, 2009 1:21:23 PM(UTC)
dirtguy150

Rank: Member

Groups: Registered
Joined: 1/17/2009(UTC)
Posts: 1

I had the same exact problem and it seems my thermal fuse was bad also. I'm off to order one right away. Thanks for the help!!!!
kayakcrzy  
#5 Posted : Sunday, January 18, 2009 1:51:00 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Glad to help both of you. Tom ApplianceEducator.com
padronman01  
#6 Posted : Saturday, August 21, 2010 11:47:09 AM(UTC)
padronman01

Rank: Member

Groups: Registered
Joined: 8/21/2010(UTC)
Posts: 1

I taped the wires, and poof, there was my flame. Thank you. Now, hopefully I can get the part...
Users browsing this topic
Guest (5)
Similar Topics
Gas dryer will not heat up (Dryer Repair)
by Ahhnother8 10/9/2014 8:16:39 PM(UTC)
GE harmony profile gas dryer will not heat (Dryer Repair)
by Thespiderman20 9/10/2013 5:44:45 PM(UTC)
Gas dryer will not heat (Dryer Repair)
by PhilWi 10/19/2012 12:50:42 PM(UTC)
Maytag gas dryer will not heat (Dryer Repair)
by jsweeyor 10/2/2012 12:15:23 PM(UTC)
GE gas dryer will not heat (Dryer Repair)
by kthorson 9/27/2012 4:30:00 AM(UTC)
Gas dryer will not heat (Dryer Repair)
by RickWilliams 10/25/2010 11:45:37 AM(UTC)
Whirlpool Kirkland Gas Dryer Will Not Heat Up (Dryer Repair)
by LITTLE RED ROOSTER 1/29/2010 9:11:39 AM(UTC)
Kenmore gas dryer will not heat (Dryer Repair)
by mcclr 10/24/2009 5:51:31 PM(UTC)
gas dryer will not heat (Dryer Repair)
by sch8891 10/13/2009 8:26:20 AM(UTC)
Maytag Gas Dryer will not heat up fully - princeton (Dryer Repair)
by brian.frasco@gmail.com 12/26/2008 1:28:44 PM(UTC)
Whirlpool gas dryer will not heat. (Dryer Repair)
by brae 11/22/2007 5:52:59 AM(UTC)
gas dryer will not heat (Dryer Repair)
by retcop320 9/11/2007 3:18:41 PM(UTC)
maytag gas dryer will not heat after initial burn (Dryer Repair)
by Agustin 8/27/2007 3:21:24 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.