Rank: Member
Groups: Registered
Joined: 6/16/2010(UTC) Posts: 13
|
It's a GE 2002+- gas dryer with light lifetime indoor only use.
Everything functions fine, except the burner will only ignite when first started. Once it reaches temp and shuts off, it will not reignite for the rest of the drying cycle. About every 2 minutes there is a "rattle" for about 30 seconds. If I turn the heat knob to "no heat" the rattle immediately stops and does not return for the remainder of the cycle. If I turn it back to any of the heat settings, the "rattle" returns back to the 2 minute cycle.
I have now replaced: igniter assembly, rotary 4-temp switch, rotary switch (xtra care), thermostat trimmer, thermostat safety, thermostat bias ctr inlt, bearing kit, bearing slides and drive belt.
There's not much left to replace. Please help...
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC) Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/16/2010(UTC) Posts: 13
|
Originally Posted by: fairbank56 Thank you. Ordered the above part.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/16/2010(UTC) Posts: 13
|
Nailed it!! Took 10 minutes to change out the parts and the dryer works once again.
Thanks for the help.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close