Broken Belt Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: ALW480DAW	Brand: Amana	Age: 5 - 10 years
Previous Topic Next Topic

rwiggin		#1 Posted : Monday, October 25, 2010 1:16:20 PM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2010(UTC) Posts: 5		Recently replaced with belt bought thru Sears, lasted about 2 weeks. Fluke, or symptom of other problem?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

magician59		#2 Posted : Monday, October 25, 2010 1:31:30 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		How easily does it turn by hand, without the belt?
User Profile View All Posts by User View Thanks

rwiggin		#3 Posted : Monday, October 25, 2010 6:25:20 PM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2010(UTC) Posts: 5		Originally Posted by: magician59 How easily does it turn by hand, without the belt? It seems to turn easily enough, a little awkward manipulating it from the bottom, but easy to turn tub. The belt looked burned.
User Profile View All Posts by User View Thanks

magician59		#4 Posted : Monday, October 25, 2010 6:31:04 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		How easily can you turn the pump pulley?
User Profile View All Posts by User View Thanks

rwiggin		#5 Posted : Tuesday, October 26, 2010 2:57:18 AM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2010(UTC) Posts: 5		In lower position it seems to freewheel, in upper it starts a tad stiff then turns. I hope it's not a 242dollar transmission,"gulp". The small pulley below the motor turns easily.
User Profile View All Posts by User View Thanks

rwiggin		#6 Posted : Tuesday, October 26, 2010 3:02:35 AM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2010(UTC) Posts: 5		Originally Posted by: magician59 How easily can you turn the pump pulley? In lower position it seems to freewheel, in upper it starts a tad stiff then turns. I hope it's not a 242dollar transmission,"gulp". The small pulley below the motor turns easily. Read more: http://forum.appliancepartspros...p;p=292134#ixzz13SgpsYZT http://forum.appliancepartspros.com
User Profile View All Posts by User View Thanks

magician59		#7 Posted : Tuesday, October 26, 2010 7:18:01 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Those are the only items that the belt drives. If you were able to freely spin them in both directions, it's possible you just got the wrong belt. Part number: AP4035118
User Profile View All Posts by User View Thanks

rwiggin		#8 Posted : Tuesday, October 26, 2010 10:32:46 AM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2010(UTC) Posts: 5		Originally Posted by: magician59 Those are the only items that the belt drives. If you were able to freely spin them in both directions, it's possible you just got the wrong belt. Part number: AP4035118 That's what I ordered this time, thanks for your help,wish me luck.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

Similar Topics

GE Dryer won't start/broken belt (Dryer Repair) by dhmostyn 12/10/2012 5:31:42 PM(UTC)

broken belt (Washer Repair) by pierre johnson 8/21/2010 7:26:24 AM(UTC)

washer stop spinning found broken belt underneath machine (Washer Repair) by Gouri Ramnarace 8/12/2010 7:04:31 AM(UTC)

Broken Belt (Washer Repair) by BRUCELOWE 6/11/2010 4:10:32 PM(UTC)

Amana washer broken belt, not turning, leaks from bottom (Washer Repair) by JonTK 9/8/2009 9:13:04 AM(UTC)

broken belt (Dryer Repair) by mpsals1111 7/19/2008 12:10:22 PM(UTC)

Whirlpool gas dryer won't turn, broken belt? (Dryer Repair) by crusader66 6/22/2008 3:49:56 PM(UTC)

Broken belt (Washer Repair) by Carlos 3/12/2008 2:42:59 PM(UTC)

Whirlpool broken belt (Washer Repair) by hopeonceagain 10/16/2007 12:44:02 PM(UTC)