Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Dryer won't heat
Options
Go to last post Go to first unread
Model: DG303 Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
Kate123  
#1 Posted : Saturday, March 5, 2016 7:28:08 AM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
My dryer quit heating. The igniter glows but no flame. I replaced the coils thinking that was the problem because of everything I had read .i noticed the dryer run for a long time and the timer never moved. Can someone help
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
thorning  
#2 Posted : Sunday, March 6, 2016 3:44:18 AM(UTC)
thorning

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 248
This may sound dumb or you may have already done it but did you try moving the timer dial to another position and see if the heat comes on. If it does you probably have a timer problem. Also if i is indeed a timer problem in that the dial does not move chances are it is a timer motor. The timer motors on the older dryers have small plastic gears inside that eventually wear out. Hope this helps. Timers can be replaced and some can be repaired . I have repaired a few and replaced timer motors on some also. Good luck
Back to top
Kate123  
#3 Posted : Sunday, March 6, 2016 7:38:13 AM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
Tried that still no heat. Igniter glows. Then hear a click and igniter goes off. Thanks for trying
Back to top
thorning  
#4 Posted : Sunday, March 6, 2016 8:23:15 AM(UTC)
thorning

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 248
I will get back to you if I come up another good suggestion. The gas valve itself may be the problem in that the solenoid coils are activating but the solenoid plungers are not opening the valve to let gas flow.
Back to top
Kate123  
#5 Posted : Saturday, March 12, 2016 4:36:27 AM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
It's getting gas because I could smell it when I turned dryer on. Going to check igniter to see if that's bad
Back to top
thorning  
#6 Posted : Saturday, March 12, 2016 5:18:45 AM(UTC)
thorning

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 248
If you smell gas when you push the start button something is wrong. Dont do anything foolish as you should not smell unburned gas at all if the igniter is working. Turn the gas off at the supply valve to check the igniter. If it is working it will glow red hot and then turn off and as it does you will hear the solenoids click to open the valve and allow gas to flow .
Back to top
Kate123  
#7 Posted : Sunday, March 13, 2016 1:01:39 PM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
Calling repair man tomorrow will let you know what the problem is
Back to top
Kate123  
#8 Posted : Saturday, March 26, 2016 2:36:36 AM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
Originally Posted by: Kate123 Go to Quoted Post
Calling repair man tomorrow will let you know what the problem is. Called repairman he told me to change the coils again still doesn't work. Any suggestions ?
Back to top
thorning  
#9 Posted : Saturday, March 26, 2016 2:57:02 AM(UTC)
thorning

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 248
Best to wait for a repairman to diagnose the problem . Sounds like you have already checked all the basics. I think you mentioned this in an earlier post but does the drum turn OK when the start button is pushed ? It still sounds to me like the burner is not allowing gas to flow thru.
Back to top
Kate123  
#10 Posted : Saturday, March 26, 2016 3:13:09 AM(UTC)
Kate123

Rank: Member

Groups: Registered
Joined: 3/5/2016(UTC)
Posts: 8
Drum turns fine.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
New Kenmore Elite 796 Gas Dryer Won't Heat (Dryer Repair)
by Guest 12/26/2022 1:54:20 PM(UTC)
Whirlpool Duet Dryer won't heat anymore (Dryer Repair)
by Guest 3/31/2021 5:35:15 AM(UTC)
Dryer won't heat consistently – Is an RCA model dryer actually GE? (Dryer Repair)
by OpsTao 12/11/2020 7:20:38 AM(UTC)
Samsung Dryer Won't heat no matter what I do (Dryer Repair)
by coachroy 10/16/2020 10:58:40 AM(UTC)
Whirlpool LGT7848AQ1 dryer won't heat (Dryer Repair)
by spiggman 9/19/2020 4:47:12 PM(UTC)
Kenmore Electric Dryer Won't Heat (Dryer Repair)
by ginakra 9/21/2017 11:03:29 AM(UTC)
Dryer won't heat (Dryer Repair)
by ncoles6 12/23/2016 6:32:33 PM(UTC)
Whirlpool Dryer won't heat (Dryer Repair)
by spelding 9/16/2016 5:48:12 AM(UTC)
Stumped - Samsung Dryer Won't Heat (Dryer Repair)
by TankusKC 1/6/2016 8:18:18 AM(UTC)
dryer won't heat (Dryer Repair)
by haymon 1/5/2016 5:47:24 PM(UTC)
Whirlpool Dryer won't heat (Dryer Repair)
by wgomezp1 10/12/2015 4:49:48 PM(UTC)
dryer won't heat (Dryer Repair)
by chash 8/6/2015 9:12:57 AM(UTC)
Gas dryer won't heat (Dryer Repair)
by pino2424 4/21/2015 5:45:55 PM(UTC)
A different my dryer won't heat problem (Dryer Repair)
by mikeysotp 11/20/2014 5:05:34 AM(UTC)
Admiral Dryer won't heat (Dryer Repair)
by MarkMLP 11/12/2014 6:25:55 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET