Rank: Member
Groups: Registered
Joined: 8/4/2013(UTC) Posts: 3
|
All of a sudden the control lock came on and will not allow the panel to be unlocked so we can use the dishwasher, Sure need your advice and help
thanks
bob
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Your model number seems incomplete. Please check it. Sears/Kenmore numbers are usually 3 digits, a period and then an additional 8 digits.
Have you tried the unlock procedure in the user manual?
Have you tried removing poser from the unit for a couple minutes to see if it will reset? |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 8/4/2013(UTC) Posts: 3
|
:( I have tried all suggested actions and those in the supplied manuel,
NO LUCK when I checked with a long time sears appliance person he said the board was bad, buying and having the old one fixed and the cost of a new one was almost the same , SO , we purchased a new washer. \
Thanks for your help, but like we know dead is dead,
poloman
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close