Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE Profile Dishwasher
Options
Go to last post Go to first unread
Model: PDW7880J01SS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Tim1539  
#1 Posted : Wednesday, March 26, 2008 11:30:33 AM(UTC)
Tim1539

Rank: Member

Groups: Registered
Joined: 3/26/2008(UTC)
Posts: 5
My dishwasher is make a very loud noise when it starts the wash cycle. Water comes out of the arm but not enough to wash anything. I have taken the motor with pump off and cleaned everything from inside the dishwasher to the pump. I believe the pump is bad but I'm not sure. I see where there is a impeller repair kit but I don't see how to take it apart.
Can this be replaced with a new pump?
And how do you get the old pump off?

Waiting with alot of dirty dishes:)
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, March 26, 2008 12:24:08 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Tim,

GE does not sell the pump separate. It comes as an assembly (pump & motor).

The impeller repair kit comes with the complete installation instructions and if the old motor is not damaged - you probably do not need the whole assembly.

- The part number for the impeller repair kit is AP631386

- The part number for the pump & motor assembly is AP3192237

Gene.
Back to top
Tim1539  
#3 Posted : Wednesday, March 26, 2008 1:40:41 PM(UTC)
Tim1539

Rank: Member

Groups: Registered
Joined: 3/26/2008(UTC)
Posts: 5
How do you get the impeller off?
Back to top
Gene  
#4 Posted : Wednesday, March 26, 2008 1:50:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
As I said it comes with the complete instructions.

Gene.
Back to top
Tim1539  
#5 Posted : Wednesday, March 26, 2008 2:23:30 PM(UTC)
Tim1539

Rank: Member

Groups: Registered
Joined: 3/26/2008(UTC)
Posts: 5
I will order now. It's just I have everything apart and it's driving me nuts not being able to take the impeller off the motor.
Back to top
Gene  
#6 Posted : Wednesday, March 26, 2008 2:33:54 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Unscrew the chopper, holding the motor shaft with a pliers.

Unscrew the plastic ring (CW).

Unscrew the impeller, holding the motor shaft with a pliers.

Remove the screws holding the pump to the motor and pull the pump out.

Gene.
Back to top
Tim1539  
#7 Posted : Wednesday, March 26, 2008 3:12:49 PM(UTC)
Tim1539

Rank: Member

Groups: Registered
Joined: 3/26/2008(UTC)
Posts: 5
Thanks, I will try that tonight. I ordered the part and it will be here in 4 to 5 days
Back to top
Gene  
#8 Posted : Wednesday, March 26, 2008 3:17:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Keep me updated, please.

Gene.
Back to top
Tim1539  
#9 Posted : Wednesday, April 2, 2008 4:32:43 PM(UTC)
Tim1539

Rank: Member

Groups: Registered
Joined: 3/26/2008(UTC)
Posts: 5
I got the new Impeller Assy installed and it works fine. THANKS

P.S. The only thing I had a problem with was the size of writing on the instructions. Very, very small. I'm not 20 anymore. Thank you again:)
Back to top
Gene  
#10 Posted : Wednesday, April 2, 2008 5:40:59 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm glad you were able to fix it.

Gene.
Back to top
Users browsing this topic
Similar Topics
GE Profile Dishwasher Hums when Off (Dishwasher Repair)
by Thom64 2/7/2022 7:19:40 PM(UTC)
GE profile dishwasher PDW9980N00SS starts then stops (Dishwasher Repair)
by cfcstl 12/15/2020 8:18:18 AM(UTC)
GE Profile Dishwasher QP 47 Can't move between different Wash programs (Dishwasher Repair)
by MTHall720 3/26/2020 11:32:29 AM(UTC)
GE Profile Dishwasher Control Module (Dishwasher Repair)
by merb 11/17/2018 4:33:33 PM(UTC)
GE profile dishwasher (Dishwasher Repair)
by barnee72 1/14/2016 5:47:55 PM(UTC)
GE Profile Dishwasher lights up, but will not start (Dishwasher Repair)
by cjsrinivas 12/21/2015 8:06:27 PM(UTC)
ge profile dishwasher - nut water inlet - repair or replace? (Dishwasher Repair)
by dsynadinos 3/1/2014 5:22:20 AM(UTC)
GE profile dishwasher won't drain completely (Dishwasher Repair)
by nazia 2/25/2014 5:52:10 AM(UTC)
GE Profile dishwasher GHDA696Pss doesnt drain completely (Dishwasher Repair)
by jdn9580 1/11/2014 10:15:13 AM(UTC)
ge profile dishwasher (Dishwasher Repair)
by rickcallaway 11/4/2013 8:17:53 AM(UTC)
GE Profile dishwasher motor fan (Dishwasher Repair)
by saegsblair 9/19/2013 5:45:58 AM(UTC)
GE Profile Dishwasher won't drain (Dishwasher Repair)
by tms101 9/14/2013 9:47:52 PM(UTC)
GE Profile dishwasher not cleaning well (Dishwasher Repair)
by edjr 3/30/2013 4:25:14 AM(UTC)
GE Profile Dishwasher - Constant Buzzing (Dishwasher Repair)
by diydaddy 1/25/2013 9:49:05 AM(UTC)
GE Profile Dishwasher will not fully drain (Dishwasher Repair)
by springerider 1/6/2013 6:30:22 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET