Rank: Member
Groups: Registered
Joined: 3/17/2008(UTC) Posts: 1
|
Problems: 1. Door no longer latches (cling) when shut. Dishwasher will still wash 2. LED lights no longer work that indicate cycle time and wash cycle desired. 3. Any way to disable the beeping sound when dishwasher is finished?
Is the latch switch broken? If this is broken, does this control the LED lights on top of the door?
Let me know, Robo
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/14/2008(UTC) Posts: 10
|
If sounds like you have a latch problem - the latch does control which display lights are showing. You may have gotten the latch in the closed position when the door is open. If this is the case the lights on the front of the door will light and not the timer and lights on the top. If this is the case you will need to remove the outer door to access the latch and reset the latch into the correct position. Once the latch position is correct your door top light will work when the door is open.
The Beep Turn the unit off and while holding the right "Cancel Drain" button turn the unit on. The "Cancel Drain" button lights will now be flashing, press the right button to scroll throught he beep volumes. When off or quiter shut the unit off to save the setting.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close