Rank: Member
Groups: Registered
Joined: 11/10/2016(UTC) Posts: 2
|
Whirlpool Dryer Model WED4800XQ0 Was heating occasionally. After replacing parts, now does not heat at all. Got all parts from you. Here is what I have replaced: AP3094244: Dryer thermal cut-off kit AP6008373: Cycle Switch AP6008325: Dryer Thermal Fuse AP3094254: Dryer heating element
Suggestions now?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)
|
One of two problems may be causing the issue from the start. 1. The timers heating contact may be bad, not making contact or the points may be burnt, which sends power from lead 1 to the heating element via the thermostats. 2. The motors centrifugal switch might have burnt points not send power from Lead 2 to the heating element.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2016(UTC) Posts: 2
|
What are your part numbers for these?
timers heating contact
motors centrifugal switch
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close