Rank: Member
Groups: Registered
Joined: 8/12/2013(UTC)
Posts: 1
|
Dishwasher runs but no water going in. Replaced Main control module. What are other possible problems?
Thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916
|
Check to make sure your water valve isn't turned off at the sink.........make sure the hose isn't kinked under unit........follow feed hose and test the inlet valve you should have 120v going to it if you do and it's not letting water in you have a bad inlet valve...........if you don't have 120v going to the inlet valve at start up you have a problem with your main control or harness connections.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/13/2013(UTC)
Posts: 0
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
