Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Washer stopped working
Options
Go to last post Go to first unread
Model: ATW4475TQ0 Brand: Admiral Age: 1 - 5 years
Previous Topic Next Topic
admiralrepair  
#1 Posted : Monday, July 29, 2013 11:17:07 AM(UTC)
admiralrepair

Rank: Member

Groups: Registered
Joined: 7/29/2013(UTC)
Posts: 2
today i was washing clothes and the washer stopped working mid rinse cycle. when i would push and pull the timer knob, it made a humming sound and would start for a few seconds, but then stop. there is water in the washer, and now there is no longer any humming sound, and it doesn't work at all. is this the timer dial that went? if so, how can i replace it?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Monday, July 29, 2013 11:59:54 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Make sure you still have power at the outlet. Otherwise, could be the timer, lid switch or bad connection at the motor. Jump out the lid switch as per this video.

Lid switch bypassing Whirlpool direct drive washer - YouTube

If that is not the problem, remove the cabinet and check the connections at the motor. Unplug the harness connector and check for burnt/corroded connection particularly on the gray wire and the two connections on the motor thermal overload switch. If everything checks out ok, I would replace the timer.

Cabinet removal: Cabinet removing Whirlpool direct drive washer - YouTube

Timer: Whirlpool 8572976 Timer - AppliancePartsPros.com

Lid switch: Whirlpool 8318084 Lid Switch - AppliancePartsPros.com

Eric
Back to top
admiralrepair  
#3 Posted : Monday, July 29, 2013 12:11:47 PM(UTC)
admiralrepair

Rank: Member

Groups: Registered
Joined: 7/29/2013(UTC)
Posts: 2
would i be able to tell if anything was wrong by opening the control panel? sometimes it does nothing. other times it hums and actually starts. the lid switch clicks on and off when i open the door. could it still be a problem?
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Kenmore series 90 washer stopped working (Washer Repair)
by Guest 3/16/2024 6:19:45 AM(UTC)
Samsung Washer stopped working (Washer Repair)
by mike613 2/14/2016 9:24:39 PM(UTC)
Crosley Washer Stopped Working (Washer Repair)
by JR2015 6/22/2015 10:23:16 AM(UTC)
Stackable Washer Stopped Working (Washer Repair)
by mbpk0521 10/29/2014 9:07:41 PM(UTC)
Kitchen Aid dishwasher stopped working (Dishwasher Repair)
by acillatem 6/15/2014 6:12:42 PM(UTC)
whirlpool washer stopped working (Washer Repair)
by kenkle 8/24/2013 5:48:22 AM(UTC)
washer stopped working in middle of cycle (Washer Repair)
by kmpadilla 6/16/2013 8:09:59 AM(UTC)
Washer stopped working mid cycle ad stopped dryer (Washer Repair)
by AngelaJo81 3/20/2013 9:01:49 AM(UTC)
HotPoint dishwasher stopped working (Dishwasher Repair)
by miklik 8/30/2012 12:18:10 PM(UTC)
Whirlpool Thin Twin washer stopped working (Washer Repair)
by jenjones6775 7/9/2012 7:08:49 PM(UTC)
Frigidaire Front Load Washer stopped working (Washer Repair)
by Kipster28 6/20/2012 2:06:34 PM(UTC)
Washer stopped working (Washer Repair)
by layman 6/19/2012 5:25:18 AM(UTC)
My Maytag Washer Stopped Working (Washer Repair)
by Susinko 11/3/2011 10:30:47 PM(UTC)
Kenmore washer stopped working, then started again, making really LOUD clanging (Washer Repair)
by cazar1961 9/23/2011 9:24:44 PM(UTC)
Maytag Dishwasher Stopped Working (Dishwasher Repair)
by wdlugitch 7/3/2011 6:53:35 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET