Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Washer not spinning
Options
Go to last post Go to first unread
Model: LW3503W Brand: Amana Age: More than 10 years
Previous Topic Next Topic
mariner  
#1 Posted : Sunday, January 20, 2008 4:24:34 PM(UTC)
mariner

Rank: Member

Groups: Registered
Joined: 1/20/2008(UTC)
Posts: 4
Washer begins to spin, but stops only after 2 - 3 seconds. The belt is intact, but shows normal wear (some cracks etc). The tub is not out of balance. It keeps trying to start the spin cycle after a few minutes but stops. Any help is greatly appreciated!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, January 21, 2008 10:21:58 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the belt and check if the motor runs without load.

Gene.
Back to top
mariner  
#3 Posted : Monday, January 21, 2008 8:45:29 PM(UTC)
mariner

Rank: Member

Groups: Registered
Joined: 1/20/2008(UTC)
Posts: 4
I removed the belt. It definitely needs to be replaced. It is not broken, but it has multiple cracks almost all the way through. The motor seems to run just fine without the belt on it. Does this mean that if the belt is replaced the washer should spin again. If not, what are the next steps.
Thank you for your help.
Back to top
Gene  
#4 Posted : Tuesday, January 22, 2008 2:09:01 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There is a good chance the new belt will solve the problem.

- The part number for the belt is AP74961

Here are the break down diagram for the Amana washer Model LW3503W

Good luck.
Gene.
Back to top
mariner  
#5 Posted : Saturday, January 26, 2008 10:17:32 AM(UTC)
mariner

Rank: Member

Groups: Registered
Joined: 1/20/2008(UTC)
Posts: 4
I replaced the belt. Initially, the machine kept stalling. It took 4 or 5 tries before it kept spinning. We've washed some loads. It works OK but the motor seems to run hot. I've never actually witnessed the motor when it runs so I don't know how hot is should get. Please advise and thanks for help.
Back to top
Gene  
#6 Posted : Saturday, January 26, 2008 3:59:21 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hot motor means: it was overloaded or the motor itself is bad.

In your case most likely the problem caused by the motor itself and it has to be replaced.

- The part number for the motor is AP3873831

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Maytag Legacy top load washer not spinning (Washer Repair)
by Guest 10/28/2023 8:56:04 AM(UTC)
Whirlpool washer Not spinning 6/21/23 (Washer Repair)
by yveron 6/21/2023 11:33:50 AM(UTC)
Whirlpool WTW4800BQ0 Washer Not Spinning (Washer Repair)
by MrTryToFixIt 12/1/2022 8:20:20 AM(UTC)
frigidaire washer not spinning out clothes (Washer Repair)
by tadthebass 3/24/2020 8:51:55 AM(UTC)
MAYTAG MHWC7500Y WASHER NOT SPINNING AT HIGH SPEED (Washer Repair)
by ehbrown1 11/5/2019 4:50:11 AM(UTC)
Stacked Maytag/Neptune Washer not spinning (Washer Repair)
by Building and Grounds 10/24/2017 12:26:37 PM(UTC)
GE Profile washer not spinning (Washer Repair)
by LSUStephen 7/16/2017 1:25:43 PM(UTC)
Whirlpool washer not spinning fast (Washer Repair)
by AmyM269 9/3/2016 4:22:47 PM(UTC)
Maytag Washer not spinning / draining (Washer Repair)
by retho78 5/21/2016 5:29:56 AM(UTC)
GE Washer not spinning (Washer Repair)
by zoobteach 8/29/2015 10:12:50 AM(UTC)
GE Washer not spinning (Washer Repair)
by atomicsynth 6/2/2015 10:36:31 PM(UTC)
Kenmore 70 Series washer not spinning (Washer Repair)
by workingdad 2/21/2015 7:31:47 PM(UTC)
Whirlpool washer not spinning or agitating; blowing breaker (Washer Repair)
by ejditz3 8/4/2014 1:15:39 PM(UTC)
GE washer not spinning any cycle (Washer Repair)
by j409 6/2/2014 7:44:19 AM(UTC)
Washer not spinning after replacing Thrust Bearing Kit (Washer Repair)
by Woody Williams 2/25/2014 2:06:33 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET