Rank: Member
Groups: Registered
Joined: 7/20/2011(UTC)
Posts: 1
|
Great forum....... I have a whirlpool GD5RHAXNQ01 that decided to flow water out of the ice maker onto the floor. I replaced the inlet valve and filter and I now get nothing from the IM.
I removed the ice makers motor head cover and measured 104 volts at the N and L test ports. when I inserted a jumper in the H and T ports with the ice maker connected, the motor did not run.
What should I do next.......does it sound like a bad IM?
Thank you for any help you can provide.
Mike
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/21/2011(UTC)
Posts: 1
|
Install jumper and thyen push the door switch. Most units will not have power with door open.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
