Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
washer stops
Options
Go to last post Go to first unread
Model: 11024942300 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
edwin3711  
#1 Posted : Monday, November 10, 2008 8:59:32 PM(UTC)
edwin3711

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 8
:confused: hi,my kenmore washer fills normal and starts washing,but when it gets to the next task (pause cool down or rinse or spin)it stops working.
I have to advance it manually to the next task.
I replaced the timer,because i was told that was the solution...it was not.
Can you help me please?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Tuesday, November 11, 2008 1:02:20 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
When the washer stops, can you get it to run right away. If not, you have an overheating motor that's probably bad. You can pull the motor out and check operation to see if it still overheats .
Back to top
edwin3711  
#3 Posted : Tuesday, November 11, 2008 7:19:14 AM(UTC)
edwin3711

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 8
yes,it starts right away,what is not doing at all is rinsing,even if i advance it manually.
it washes,spins,fills normally......when it gets to rinse...stops and when it gets to pause cool down task,which is one of the tasks before rinsing on -permanent press ll -it just wont advance.
my main problem is that is not rinsing at all.
thank you very much,really appreciate your help.
Back to top
magician59  
#4 Posted : Tuesday, November 11, 2008 8:16:15 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
Check your water supply valve. It may be clogged on the cold side.
Back to top
edwin3711  
#5 Posted : Tuesday, November 11, 2008 9:58:37 AM(UTC)
edwin3711

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 8
I believe you found the solution,hot water goes in but cold water doesn't.

there is an external trap or filter,i cleaned it up,but there must still be an internal trap that is clogged up....how do i get to it?

thanks.
Back to top
edwin3711  
#6 Posted : Tuesday, November 11, 2008 1:37:38 PM(UTC)
edwin3711

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 8
fixed the problem,cold water supply was disrupted,replaced faulty inlet valve.
now it works like new.

Thank you very,very much,couldn't do it without you.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Dishwasher stops in middle of cycle and has draining problems (Dishwasher Repair)
by Guest 12/21/2022 1:34:11 PM(UTC)
Whirlpool Cabrio Washer Stops Intermittently (Dishwasher Repair)
by Amadago76 4/1/2022 9:57:02 AM(UTC)
Maytag Dishwasher stops several times during normal cycle (Dishwasher Repair)
by vanordens3 12/28/2021 12:26:19 PM(UTC)
Frigidaire FTF530 Washer Stops Randomly During Wash Cycle (Dishwasher Repair)
by jensenpe 10/11/2021 7:28:24 AM(UTC)
Bosch dishwasher stops at beginning of cycle (Dishwasher Repair)
by Daniel J 2/23/2021 10:39:24 PM(UTC)
Maytag Neptune washer stops and won't unlock (Washer Repair)
by dctaz37 9/13/2020 5:18:38 PM(UTC)
Washer Stops Spinning Abruptly or Doesn't Spin At All (Washer Repair)
by ggarcia 3/28/2020 9:20:13 AM(UTC)
Maytag dishwasher stops filling then shuts down (Dishwasher Repair)
by fordguy101 11/2/2018 6:58:19 PM(UTC)
Washer stops agitating mid cycle - F7E5 shifter fault (Washer Repair)
by Phil915 9/15/2018 2:45:38 PM(UTC)
Washer stops mid cycle (Washer Repair)
by NevadaBill 7/3/2017 7:54:11 AM(UTC)
Maytag Centennial Washer Stops Mid-Cycle (Washer Repair)
by washer2017 3/16/2017 5:58:01 AM(UTC)
washer stops mid cycle (Washer Repair)
by postal13 4/18/2016 4:38:15 PM(UTC)
Washer Stops before pump and spin (Washer Repair)
by tomwing 3/25/2016 1:40:09 PM(UTC)
Maytag washer stops agitating in wash cycle (Washer Repair)
by Teggy87 12/6/2015 8:51:20 AM(UTC)
Washer Stops during Sensing Mode (Washer Repair)
by gotimmygo89 10/5/2015 7:12:57 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET