Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
metropical  
#1 Posted : Friday, November 7, 2014 6:47:45 AM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
figured I'd check for stopped drain in the DW first as we have no disposal in the sink.
got the baskets and prop out.
But the feed tube assy has no screws. Does it just pull out or slide or ....?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Saturday, November 8, 2014 2:20:52 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts.
If you click on a part's description of picture a new page will open with additional info, often a Q&A section that may be helpful.
Parts for KitchenAid KUDS02FSPA3 Dishwasher - AppliancePartsPros.com

The following may also help.
You have to join the site and be logged in to be able to download it.
Parts for KitchenAid KUDS02FSPA3 Dishwasher - AppliancePartsPros.com
THIS FORUM IS DEAD!!!!!!!
metropical  
#3 Posted : Saturday, November 8, 2014 4:48:01 AM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
thanks very
denman  
#4 Posted : Saturday, November 8, 2014 6:10:04 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
OOPS!!!
Looks like I did not give you the link to the manual so here it is.
http://appliancejunk.com...wnloads;sa=view;down=234

Sorry about that.
THIS FORUM IS DEAD!!!!!!!
metropical  
#5 Posted : Saturday, November 8, 2014 6:37:17 AM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
thanks for the manual.
metropical  
#6 Posted : Wednesday, November 12, 2014 7:50:48 AM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
in re-assembling the dw, I don't recall if the lower spray arm rocked a little on it's axel as it is now.
Should there be a little play
denman  
#7 Posted : Wednesday, November 12, 2014 9:29:39 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes it will be a litte loose
THIS FORUM IS DEAD!!!!!!!
metropical  
#8 Posted : Wednesday, November 12, 2014 6:05:05 PM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
well cleaning the drain, sump and chopper didn't do it.
still water in the tub
dishes are clean.
I think the LED was flashing twice, but I rushed to empty the tub with the held Cancel button, so I may have been wrong, but at least twice.
denman  
#9 Posted : Thursday, November 13, 2014 1:56:28 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Does it at least drain some water re: the drain pump is running when it should.

If it does then it could be a problem with the drain pump.
THIS FORUM IS DEAD!!!!!!!
metropical  
#10 Posted : Sunday, November 16, 2014 6:48:11 AM(UTC)
metropical

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 24

Thanks: 1 times
update: ran today. Failed after the tub filled.
the LED was single flashing, constantly and the door was ajar.
no soap was dispensed.

Float switch assy next?

I can empty the tub by holding cancel a few secs and closing.
Users browsing this topic
Guest (4)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.