Rank: Member
Groups: Registered
Joined: 4/30/2013(UTC)
Posts: 2
|
I've read a bit about this clicking sound. Posts seem to point to a bad main board. However, here is why I'm creating this new post....
I cleaned out the bottom / coils and the little white condensor fan as well.
Plugged it back in and it started working. It worked well over night but today morning the clicking started again.
When it is clicking, the inside lights do not come on and it does not cool.
I'm guessing its overheating and the relay is doing its job correctly by protecting the compressor. When it cools down, it works again.
Question: SHould I simply replace the condensor fan motor or should I replace the motor and the board?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
You can try a portable fan to cool the compressor, but I think you may have an external power problem, the control board does not control the lights.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
