Rank: Member
Groups: Registered
Joined: 11/4/2008(UTC) Posts: 3
|
:confused: when going into the spin cycle the washer will not spin. i have to spin by hand as fast as i can to kick start it. now it just won't spin. also the tube moves around alot. you can move it side ways and almost see down the inside.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: babassmaster ...the tube moves around alot. you can move it side ways and almost see down the inside... Remove the front panel and check the tub dampening straps (#370 on the break down diagram). Regarding the spin problem the first failure suspect is the motor and I would recommend to replace the belt too. - The part number for the motor & clutch assembly is AP3160670 - The part number for the belt is AP2044592 Here are the break down diagrams for the GE washer Model S3200Y0WWGene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/4/2008(UTC) Posts: 3
|
can I tighten the dampening straps by turning them evenly?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
As far as I know they are not adjustable.
Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close