Rank: Member
Groups: Registered
Joined: 4/21/2011(UTC)
Posts: 2
|
Originally Posted by: okolehau  Hi There,
I just read a post else-where that suggested the following to reset the dishwasher push the sanirinse button-dry button-sani-rinse button-dry button in that order When I did this I got some spurious readings on the panel. But these disappeared when I pushed the cancel button.
I was then able to start a normal dishwasher cycle. Good Luck!
IT WORKED FOR ME THANK YOU
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/3/2011(UTC)
Posts: 1
|
Originally Posted by: BKRMBen IT WORKED FOR ME THANK YOU After 1 week of this same issue "runs for a few seconds and shut off", I finally relented to my wife's "gentle pressure" to fix the dishwasher. This trick worked for me! Once again, I am a hero, for now. :) Thanks Again!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/6/2012(UTC)
Posts: 1
|
Originally Posted by: April24 Whirlpool Gold QP111 - tried pushing normal, light, pots and pans - nothing lit up. The only button I could use was the "cancel" - that would run but nothing else. Tried the suggestion on this forum - turned off at the breaker for about 15 mins then hit sani rinse/dry/sanirinse/dry. The machine cycled through a diagnostic and when it stopped I was able to start the cycle - have not had a problem since! worked like magic. only thing i did different is i unpluged washer instead of turning off breaker. washer is working now. keep fingers crossed and hope this fixes problem for good. you guys just saved me a fortune on repairs and service! Thanks a bunch!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/10/2013(UTC)
Posts: 2
|
Thank you so much for posting this.... worked like a charm!!!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/10/2013(UTC)
Posts: 2
|
Originally Posted by: okolehau Hi There,
I just read a post else-where that suggested the following to reset the dishwasher push the sanirinse button-dry button-sani-rinse button-dry button in that order When I did this I got some spurious readings on the panel. But these disappeared when I pushed the cancel button.
I was then able to start a normal dishwasher cycle. Good Luck!
Thankyou!!!!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/13/2013(UTC)
Posts: 0
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/13/2013(UTC)
Posts: 0
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
