Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Thermador Cook Top
Options
Go to last post Go to first unread
Model: SGCS304RS Brand: Thermador Age: 5 - 10 years
Previous Topic Next Topic
JOES  
#1 Posted : Thursday, April 10, 2008 7:24:12 AM(UTC)
JOES

Rank: Member

Groups: Registered
Joined: 4/10/2008(UTC)
Posts: 2
The "extra Low" Right Front Burner On The Cooktop Just Stopped Working. The Igniters Will Spark But I Get No Gas Flow From The Burner. Could It Be The Solenoid For That Burner? How Do I Get To It? Do You Have To Remove The Cooktop From The Counter?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
gearhead1218  
#2 Posted : Friday, April 11, 2008 5:20:56 PM(UTC)
gearhead1218

Rank: Member

Groups: Registered
Joined: 4/7/2008(UTC)
Posts: 62
Those potentiometers just love to go bad on the Thermadors. I just got bit on that recently and learned a few things on them. The replacements are better amd come as a kit that includes a new simmer controller.
The selonoids while not trouble free are pretty reliable from what I hear.
Back to top
sreng  
#3 Posted : Friday, June 6, 2008 10:32:13 AM(UTC)
sreng

Rank: Member

Groups: Registered
Joined: 6/6/2008(UTC)
Posts: 6
UserPostedImage Thermador Cook Top SGCS365RW

JOES, I have the same problem as you, though a different model#.

Did the kit solve your problem?

gearhead1218, do you recommend the same for me?

Thanks.
Back to top
gearhead1218  
#4 Posted : Friday, June 6, 2008 4:32:48 PM(UTC)
gearhead1218

Rank: Member

Groups: Registered
Joined: 4/7/2008(UTC)
Posts: 62
The potentiometers that are being sent out with this kit are a little different than the old ones. The MFG. won't admit it, but the old ones are crap.
Back to top
sreng  
#5 Posted : Saturday, June 7, 2008 4:03:07 AM(UTC)
sreng

Rank: Member

Groups: Registered
Joined: 6/6/2008(UTC)
Posts: 6
gearhead1218, thanks for your response.

Is that kit part # AP3572616 ?

It seems as if that kit is recommended for several different Thermador cooktops. Is it a "one size fits all" situtation?
Back to top
sreng  
#6 Posted : Tuesday, June 10, 2008 12:22:14 PM(UTC)
sreng

Rank: Member

Groups: Registered
Joined: 6/6/2008(UTC)
Posts: 6
Thermador cooktop SGCS365RW, Serial # 98090557M

Front xlo burner not lighting.

I ordered AP's AP3872616 (Bosch part No, 497235) potentiometer kit yestereday, received it today.

I installed the new simmer controller and the new potentiometers. The only thing that happened when I tried it was that gas came out of the back right burner, but there was no ignition at any burner.

I replaced the original parts, reversing the two original potentiometers. Then four of the five burners worked again, but not the rear center (xlo). Now the front xlo lites fine.

I called Thermador customer service. Only an authorized repair person can get information from their technicians.

Does the new kit require something other than a simple swap?
Could the simmer controller be defective?
Back to top
sreng  
#7 Posted : Thursday, June 12, 2008 6:20:20 AM(UTC)
sreng

Rank: Member

Groups: Registered
Joined: 6/6/2008(UTC)
Posts: 6
Did a reinstall of the new parts today and all burners are working properly. It is a simple swap.
Back to top
redwood42  
#8 Posted : Tuesday, September 16, 2008 7:12:46 AM(UTC)
redwood42

Rank: Member

Groups: Registered
Joined: 9/16/2008(UTC)
Posts: 1
DOes anyone know if this replacement kit will work on the Thermador SGSCV36G? I have the same problem with my left front extra low burner and every site says no part available.

Thanks
Back to top
Gene  
#9 Posted : Tuesday, September 16, 2008 3:31:42 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
redwood42,

I would recommend to call the customer service (877-477-7278) and ask for Adam. He'll help you.

Gene.
Back to top
sreng  
#10 Posted : Tuesday, October 27, 2009 8:11:31 AM(UTC)
sreng

Rank: Member

Groups: Registered
Joined: 6/6/2008(UTC)
Posts: 6
Originally Posted by: sreng Go to Quoted Post
Did a reinstall of the new parts today and all burners are working properly. It is a simple swap.

That was in June of 08.

Oct 28, 2009 - Used the front extralow burner once this morning- all ok. Tried to use it a few moments later and heard a pop sound. Now both extralow burners are inopperative. Any suggestions?
Back to top
Users browsing this topic
Guest (6)
Similar Topics
Old Thermador cook top mystery (Oven Repair (including Ranges and Cooktops))
by dee6634 6/21/2012 1:57:16 PM(UTC)
Thermador Cook Top (Oven Repair (including Ranges and Cooktops))
by gary@custominteriors 2/28/2011 11:14:03 AM(UTC)
Thermador cook top pop (Oven Repair (including Ranges and Cooktops))
by flip 5/13/2008 10:20:32 AM(UTC)
ignitor problem on Thermador cook top (Oven Repair (including Ranges and Cooktops))
by daneh 3/22/2008 9:04:33 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET