Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

29 Pages«<89101112>»
Options
Go to last post Go to first unread
Gene  
#91 Posted : Friday, July 9, 2010 5:44:16 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Thank you for your good words.

Gene.
Marshrat  
#92 Posted : Tuesday, July 13, 2010 8:26:00 PM(UTC)
Marshrat

Rank: Member

Groups: Registered
Joined: 7/13/2010(UTC)
Posts: 6

Gene,
I have a Whirlpool black double oven, model number RBD306PBD12. Same error code issue; unplugged the control ribbon, turned the power back on and it is now showing E1 F2 error code. Do I need the panel or the board?
Marshrat  
#93 Posted : Wednesday, July 14, 2010 6:29:34 AM(UTC)
Marshrat

Rank: Member

Groups: Registered
Joined: 7/13/2010(UTC)
Posts: 6

Now this morning after several hours of being plugged back in the screen is blank; all there is is an occasional short beep, longer beep, beep beep beep.
Gene  
#94 Posted : Wednesday, July 14, 2010 10:36:24 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The error code "F2-E1" means that the control senses the key pad ribbon cable disconnected.

Inspect the ribbon cable for a hairline cracks with a magnifying glass. If there is nothing wrong, plug it back into the control board connector, power up the oven and watch the display. Try to set the time of the day. Post the result.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL RBD306PDB12 | AppliancePartsPros.com

Gene.
Marshrat  
#95 Posted : Thursday, July 15, 2010 6:31:03 AM(UTC)
Marshrat

Rank: Member

Groups: Registered
Joined: 7/13/2010(UTC)
Posts: 6

powered up, screen lit up, then went to clock with PF message. Reset the clock and it is working fine for right now. If it does not last...???
Marshrat  
#96 Posted : Thursday, July 15, 2010 6:41:08 AM(UTC)
Marshrat

Rank: Member

Groups: Registered
Joined: 7/13/2010(UTC)
Posts: 6

after about 1/2 hour now, the clock display is fading out for a 1/2 second or so every so often but comes back on....
Gene  
#97 Posted : Thursday, July 15, 2010 2:56:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad control board, but there is a small chance for the low voltage transformer (#7 on the diagram) and the control panel to be bad as well. I would replace the control board first, hoping it will solve the problem.

- The control board Part number: AP3767567
Part number: AP3767567



Gene.
Marshrat  
#98 Posted : Thursday, July 22, 2010 7:16:47 AM(UTC)
Marshrat

Rank: Member

Groups: Registered
Joined: 7/13/2010(UTC)
Posts: 6

Originally Posted by: Gene Go to Quoted Post
Most likely the problem is a bad control board, but there is a small chance for the low voltage transformer (#7 on the diagram) and the control panel to be bad as well. I would replace the control board first, hoping it will solve the problem.

- The control board Part number: AP3767567
Part number: AP3767567



Gene.


Got the part yesterday, hooked it up and all seems to be working fine. Thank you very much for your help and expertise! Anything I should watch for that might indicate another problem?
Gene  
#99 Posted : Thursday, July 22, 2010 1:01:17 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad to hear that the new control board solved the problem.

There is not much what you can do to prevent it in the future.

Gene.
Mr.B12  
#100 Posted : Tuesday, August 3, 2010 1:27:20 PM(UTC)
Mr.B12

Rank: Member

Groups: Registered
Joined: 7/3/2010(UTC)
Posts: 4

Hi Gene,

It's me again. It's been while since my last post but I took your advice and returned the control board and ordered another one (part AP3595759 (8302319). I got the new part and installed it over the weekend and I'm still getting the same E1 F5 error code. I'm running out of options here and I don't really want to buy new unit or pay an arm and a leg for someone else to fix it. Any thoughts on what I should try next? As always, your advice is greatly appreciated it. Thanks.
Users browsing this topic
Guest (9)
Similar Topics
Whirlpool fault code E6 F2 (Oven Repair (including Ranges and Cooktops))
by msdabbert 11/26/2009 8:21:35 PM(UTC)
29 Pages«<89101112>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.