Rank: Member
Groups: Registered
Joined: 3/16/2008(UTC) Posts: 1
|
WATER DISPINCES INTO GLASS ,BUT NO WATER GOES INTO ICE MAKER:o
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The first thing I would check is the water feeding tube into the ice maker for ice inside. If it's frozen, you can use a hair dryer to defrost it. In that case the water inlet valve has to be replaced. - The part number for the water inlet valve is AP4298908 Gene.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/11/2008(UTC) Posts: 66
|
Very good advice Gene.
I have seen alot of guys just thaw the line, and not replace the valve. Though this may work on occasion, normally the frozen line syndrome is caused by a bad inlet valve.
Matt
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close