|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Refrigerator |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: CSX24DRB Brand: Hotpoint Age: More than 10 years
The refrigerator door will not seal completely without manually pushing the door closed. Seal on the door is good, looking to replace the door cam part # AP2058495. Do you think that this will fix my problem.
Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
Yes, that is the likely problem. . Watch the operation of the door to see if it rises up when opened. IF not, that's your problem
To install it Leave the door shut and let the magnetic gasket hold the door in place. Put something between the bottom of the door and the floor to hold it in case it slips. Remove the bracket holding the pin and hinge assembly taking note of order of removal of parts. Slide new cams on. You probably need two. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Amana Refrigerator Freezing in Refrigerator | cdodson1 | Refrigerator & Freezer Repair | 4 | 05-10-2009 09:12 PM |
| Commercial Refrigerator and True Refrigerator | restaurantproonline | Refrigerator & Freezer Repair | 0 | 12-17-2008 11:25 PM |