Rank: Member
Groups: Registered
Joined: 6/10/2008(UTC)
Posts: 2
|
My dryer all of a sudden stopped completely drying clothes. When I start the cycle as usual and it runs, the clothes are not completely dry. I hear the gas heating click on and it does get hot inside the drum and the clothes do dry to about 75%. Does anyone know what this might be, some kind of control module, moisture sensor, etc. Everything else on the dryer works fine and all the air ducts and lint filters are free and clear. It has just stopped completely drying clothes requiring me to run it another 30 minutes or so to dry a typical load.
Thoughts?
Thanks,
Chuck
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
|
Check the vent outside the house, and make sure you have good airflow, if it's restricted, you will have to run the load twice. Also, does the top of the dryer get hot to the touch, and is there always lint around the door, if so you have a restriction.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
