Rank: Member
Groups: Registered
Joined: 2/24/2008(UTC) Posts: 3
|
I have a HE3 front loader. When it’s get to the rinse part and the setting is cold water, it's rinses with hot water. Have checked hoses and screen every thing seams normal. It comes coldwater out of the hose when disconnected from the machine. Anyone have suggestions.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
What happens if you select cold or hot water for wash cycle?
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/24/2008(UTC) Posts: 3
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You got the fill hoses switched around.
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/24/2008(UTC) Posts: 3
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Verify with a meter that you get 115 volts to the hot water solenoid when you select cold. If so, you have a bad control board. You may want to just switch the hoses to save money, or switch the wiring.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close