Rinse water temperature Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: HE3	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

goonybird		#1 Posted : Sunday, February 24, 2008 11:35:11 PM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2008(UTC) Posts: 3		I have a HE3 front loader. When it’s get to the rinse part and the setting is cold water, it's rinses with hot water. Have checked hoses and screen every thing seams normal. It comes coldwater out of the hose when disconnected from the machine. Anyone have suggestions.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Monday, February 25, 2008 2:03:24 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What happens if you select cold or hot water for wash cycle? Gene.
User Profile View All Posts by User View Thanks

goonybird		#3 Posted : Monday, February 25, 2008 8:09:47 PM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2008(UTC) Posts: 3		Still uses hotwater GB
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, February 25, 2008 8:19:16 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You got the fill hoses switched around. Gene.
User Profile View All Posts by User View Thanks

goonybird		#5 Posted : Tuesday, February 26, 2008 8:39:54 AM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2008(UTC) Posts: 3		have checked that too. GB
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Tuesday, February 26, 2008 9:30:28 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Verify with a meter that you get 115 volts to the hot water solenoid when you select cold. If so, you have a bad control board. You may want to just switch the hoses to save money, or switch the wiring.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)