Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
barnee72  
#1 Posted : Thursday, January 14, 2016 5:47:55 PM(UTC)
barnee72

Rank: Member

Groups: Registered
Joined: 1/14/2016(UTC)
Posts: 1

I have a ge profile dishwasher pdwt380r10ss. I had lots of hard water and detergent build up. I took apart the inside and cleaned everything out. The fine filter had a gasket that was falling apart. I put it back together and didn't replace the gasket. Is it ok to run the dishwasher without it? My second problem is that I have a loud humming only when water is pumping thru the unit. I have the motor off and impeller off and everything looks good. Could my moter be starting to go bad? Will replacing the impeller help? I have ran the unit with the top rack removed and it still is humming. I also put the o ring on the input for the water on the second rack. I AM VERY FRUSTRATED!! Thanks for any help!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
dannyvela  
#2 Posted : Wednesday, March 1, 2017 10:55:31 AM(UTC)
dannyvela

Rank: Member

Groups: Registered
Joined: 3/1/2017(UTC)
Posts: 1

I have the same issue. I bought the filter but can´t find the replacement part for the seals/gaskets. Do you installed it without anything? any issues?

Do you know why the part is so deteriorated? maybe water temperature too high?

I looked at the original filter and its perimeter has a cutting edge with the deteriorated gasket. The new filter has a bent around all the perimeter and inner holes... no gasket and therefore I´m stuck with the repair.
dannyvela attached the following image(s):
abc1.jpg
abc2.jpg
abc3.jpg
Users browsing this topic
Guest (3)
Similar Topics
GE Profile Dishwasher Hums when Off (Dishwasher Repair)
by Thom64 2/7/2022 7:19:40 PM(UTC)
GE profile dishwasher PDW9980N00SS starts then stops (Dishwasher Repair)
by cfcstl 12/15/2020 8:18:18 AM(UTC)
GE Profile Dishwasher QP 47 Can't move between different Wash programs (Dishwasher Repair)
by MTHall720 3/26/2020 11:32:29 AM(UTC)
GE Profile Dishwasher Control Module (Dishwasher Repair)
by merb 11/17/2018 4:33:33 PM(UTC)
GE Profile Dishwasher lights up, but will not start (Dishwasher Repair)
by cjsrinivas 12/21/2015 8:06:27 PM(UTC)
ge profile dishwasher - nut water inlet - repair or replace? (Dishwasher Repair)
by dsynadinos 3/1/2014 5:22:20 AM(UTC)
GE profile dishwasher won't drain completely (Dishwasher Repair)
by nazia 2/25/2014 5:52:10 AM(UTC)
GE Profile dishwasher GHDA696Pss doesnt drain completely (Dishwasher Repair)
by jdn9580 1/11/2014 10:15:13 AM(UTC)
ge profile dishwasher (Dishwasher Repair)
by rickcallaway 11/4/2013 8:17:53 AM(UTC)
GE Profile dishwasher motor fan (Dishwasher Repair)
by saegsblair 9/19/2013 5:45:58 AM(UTC)
GE Profile Dishwasher won't drain (Dishwasher Repair)
by tms101 9/14/2013 9:47:52 PM(UTC)
GE Profile dishwasher not cleaning well (Dishwasher Repair)
by edjr 3/30/2013 4:25:14 AM(UTC)
GE Profile Dishwasher - Constant Buzzing (Dishwasher Repair)
by diydaddy 1/25/2013 9:49:05 AM(UTC)
GE Profile Dishwasher will not fully drain (Dishwasher Repair)
by springerider 1/6/2013 6:30:22 PM(UTC)
GE Profile dishwasher tripping circuit (Dishwasher Repair)
by Ale17 12/6/2012 7:54:38 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.