Bought a new house that had a Whirlpool Conquest that after installing a new relay start is working great. However after getting the water hooked up, the water dispenser isn't working. The ice maker works but the water only has a small trickle coming out. I then realized there was no filter or filter cap so I ordered both. After installing, the water flowed at a pretty fast speed for a minute or so but then stopped, spurted, trickled, spurted, nothing, drip, nothing etc until finally we're back to just a slow trickle again. I tried taking the filter out and just using the cap and that hasn't worked. I tried holding the dispenser down for 6-7 minutes like the manual suggested to clear the line and still just a trickle. I'm out of ideas.