Jas O Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

Jas O		#1 Posted : Thursday, May 23, 2013 6:53:49 PM(UTC)
Rank: Member Groups: Registered Joined: 5/23/2013(UTC) Posts: 5		Have washer with bad clutch. Everything is apart but the shaft on the tranmission will not pull out of the washer so I can change the clutch. I need help. Thank you Jas O
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

fairbank56		#2 Posted : Thursday, May 23, 2013 7:24:28 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Model number???
User Profile View All Posts by User View Thanks

Jas O		#3 Posted : Thursday, May 23, 2013 10:13:09 PM(UTC)
Rank: Member Groups: Registered Joined: 5/23/2013(UTC) Posts: 5		Originally Posted by: fairbank56 Model number??? Utlimate Care 2. 10 cycle # sn828086
User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Friday, May 24, 2013 4:44:09 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Still need the model number. If it has the fabric softener dispenser, did you remove the clip and washer from the agitator shaft? Thoroughly clean the exposed part of the agitator shaft? Eric
User Profile View All Posts by User View Thanks

Jas O		#5 Posted : Friday, May 24, 2013 6:25:23 AM(UTC)
Rank: Member Groups: Registered Joined: 5/23/2013(UTC) Posts: 5		Originally Posted by: fairbank56 Still need the model number. If it has the fabric softener dispenser, did you remove the clip and washer from the agitator shaft? Thoroughly clean the exposed part of the agitator shaft? Eric Yes I removed clip and washer. Model #LSQ9600JQO Thanks Jas O
User Profile View All Posts by User View Thanks

Jas O		#6 Posted : Friday, May 24, 2013 6:45:56 AM(UTC)
Rank: Member Groups: Registered Joined: 5/23/2013(UTC) Posts: 5		Originally Posted by: Jas O Yes I removed clip and washer. Model #LSQ9600JQO Thanks Jas O ps When I pull it out 2 or 3 in its a hard solid hit not just stuck.
User Profile View All Posts by User View Thanks

fairbank56		#7 Posted : Friday, May 24, 2013 7:42:58 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Probably rust or gunk buildup on the agitator shaft. You will have to use brute force. A helper with heavy hammer and large drift pin banging down on top of agitator shaft while you pull on the gearcase. Eric
User Profile View All Posts by User View Thanks

Jas O		#8 Posted : Friday, May 24, 2013 1:44:15 PM(UTC)
Rank: Member Groups: Registered Joined: 5/23/2013(UTC) Posts: 5		Originally Posted by: fairbank56 Probably rust or gunk buildup on the agitator shaft. You will have to use brute force. A helper with heavy hammer and large drift pin banging down on top of agitator shaft while you pull on the gearcase. Eric Thanks alot it worked. Now I have a clicking noise when it first starts spining and then it goes away. It only does it at first when it starts at a slow speed and as it buildes up speed no problem
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)