Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages123>
Fridge running to cold freezes food
Options
Go to last post Go to first unread
Model: KSRA22ILSS02 Brand: Kitchen Aid Age: More than 10 years
Previous Topic Next Topic
FredericS  
#1 Posted : Saturday, April 13, 2013 7:41:09 AM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Hi,

My fridge freezes food. I checked the coils. I checked the damper. It's also OK.

I was told to ask if it could be the Electronic Control. That possibly that needs to be replaced?

I have the setting on the temp control set to the warmest setting and the food still freezes. I have a mercury thermometer in her so that I can monitor the fridge temp and it was always running cooler but 2 days ago it started running much colder and freezing lettuce, the milk, everything,..

Thanks!

Frederic
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
FredericS  
#2 Posted : Saturday, April 13, 2013 8:49:38 AM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Originally Posted by: FredericS Go to Quoted Post
Hi,

My fridge freezes food. I checked the coils. I checked the damper. It's also OK.

I was told to ask if it could be the Electronic Control. That possibly that needs to be replaced?

I have the setting on the temp control set to the warmest setting and the food still freezes. I have a mercury thermometer in her so that I can monitor the fridge temp and it was always running cooler but 2 days ago it started running much colder and freezing lettuce, the milk, everything,..

Thanks!

Frederic


Sorry made a typo.

The fridge is running 'too' cold:)

Also could it be the control board assembly?

I may just order both: the electronic control & the control board assembly. Apparently they are different parts

Thanks again
Back to top
denman  
#3 Posted : Sunday, April 14, 2013 6:02:42 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool KSRA22ILSS02 Refrigerator - AppliancePartsPros.com

See the attachment for the tech sheet

I only see one main control board.

Try running the diagnostics in the tech sheet.

What is the freezer temperature?
It should be 0 to 5 degrees F.
File Attachment(s):
KSRA22.pdf (767kb) downloaded 19 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
FredericS  
#4 Posted : Tuesday, May 7, 2013 10:08:21 AM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Hi,

I did the diagnostic test as you suggested.

I'm not sure if I did it properly. I followed the instructions ( press the control on button and the water filter reset simultaneously for 3 sec.)

What the readings after the test: freezer =5 Fridge=1

Let me know what I should try next

Thanks,

Frederic
Back to top
FredericS  
#5 Posted : Tuesday, May 7, 2013 11:57:25 AM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Freezer is set at 5F and the fridge @37F

The settings don't seem to make much difference though as it usually stays in the zone and then it goes haywire after while. It can maintain the temperature range for couple days and then after a while it freezes food like crazy!
Back to top
denman  
#6 Posted : Wednesday, May 8, 2013 2:36:15 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sounds like a control board problem.
Especially if unplugging it for a couple minutes gets it running correctly again (resetting the control board).
THIS FORUM IS DEAD!!!!!!!
Back to top
FredericS  
#7 Posted : Wednesday, May 8, 2013 6:24:48 AM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Originally Posted by: denman Go to Quoted Post
Sounds like a control board problem.
Especially if unplugging it for a couple minutes gets it running correctly again (resetting the control board).


OK thanks.

I'll order a new board. Is that something I can do myself? I'm pretty handy, but just checking to see what your thoughts are.

Thanks!
Back to top
denman  
#8 Posted : Wednesday, May 8, 2013 7:53:57 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes you should be able to do it.

Just be sure to unplug the unit first.
You would be surprised at how many people forget to do this.

Also if your house has a lot of carpeting or you get static shocks fairly often ground yourself before stating. Probably the easiest is to grab one of the pipes under the sink if you have copper plumbing Only need to touch it for about 5 seconds.
THIS FORUM IS DEAD!!!!!!!
Back to top
FredericS  
#9 Posted : Wednesday, May 8, 2013 12:08:00 PM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
OK. Thanks a bunch

I'll let you know how it works out
Back to top
FredericS  
#10 Posted : Saturday, May 11, 2013 7:09:25 PM(UTC)
FredericS

Rank: Member

Groups: Registered
Joined: 4/13/2013(UTC)
Posts: 14
Hi Denman,

I replaced the part and the fridge temp would not go down. My wife is giving me a hard time about all the food going bad & my son's frozen yougurt sticks have all melted and he's mad too. I put the old board back in to see if it would bring the temp down. I'm waiting to see.
A bit discouraged, as I spent $197 on the part with no resolution.
Back to top
Users browsing this topic
Guest (4)
3 Pages123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET