Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jdeemer  
#1 Posted : Wednesday, January 2, 2013 12:31:23 PM(UTC)
jdeemer

Rank: Member

Groups: Registered
Joined: 6/13/2012(UTC)
Posts: 2

I'm having an issue with our Maytag MAV6357AWW washing fine, but not spinning fast enough to drain water. I checked the belt and it's extremely loose. Not sure how it gets tight due to the fact that I can just move the motor back and forth with ease. Is there a way to tighten the motor down to create more tension in the belt? It seems to slide back and forth effortlessly. :confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Friday, January 4, 2013 3:08:16 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

The belt is loose because the motor motion serves as a clutch, so that is not the problem.

On these models if there is a spin problem the thrust bearing

Part number: AP4009132
Part number: AP4009132


is the first thing to change out. Directions are included.
jdeemer  
#3 Posted : Friday, January 4, 2013 3:20:17 PM(UTC)
jdeemer

Rank: Member

Groups: Registered
Joined: 6/13/2012(UTC)
Posts: 2

Thanks sidfink! I'll see what I can do. Do you know how difficult changing out that thrust bearing is?
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.