Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jlski  
#1 Posted : Tuesday, October 9, 2012 12:18:25 PM(UTC)
Jlski

Rank: Member

Groups: Registered
Joined: 10/9/2012(UTC)
Posts: 2

need steps to follow to replace blower wheel. top, front, and drum removed. what next?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Tuesday, October 9, 2012 1:11:42 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Remove the screw and clamp holding the blower and pull out the blower.
Memories the way the clamp is installed.

Here are the breakdown diagrams and Backsplash, Blower & Motor Assembly parts for GE DWSR405GB1WW - AppliancePartsPros.com

Simon.
Jlski  
#3 Posted : Wednesday, October 10, 2012 7:55:38 AM(UTC)
Jlski

Rank: Member

Groups: Registered
Joined: 10/9/2012(UTC)
Posts: 2

Originally Posted by: Simon / APP Team Go to Quoted Post
Hi.

Remove the screw and clamp holding the blower and pull out the blower.
Memories the way the clamp is installed.

Here are the breakdown diagrams and Backsplash, Blower & Motor Assembly parts for GE DWSR405GB1WW - AppliancePartsPros.com

Simon.

actually for this model you need to remove the two screws that hold the motor mount bracket to the base and the two long screws on the front that hold the motor attached blower flange to the blower assembly. Then you can slightly lift and pull the motor assembly with blower wheel attached towards the inside of the dryer. expect a lot of dust which in my case caused pushed the wheel into contact with the front assembly housing and caused the screeching noise.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.