Rank: Member
Groups: Registered
Joined: 6/19/2012(UTC) Posts: 2
|
I am trying to replace the door latch and the old door latch connectors will not release from the electrical cords? Is there an easy way to pull the connectors from the wires?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Not sure what you are referring to. If you mean getting the connectors off the door latch switches often a flat screw driver of the correct size will do it. Put the driver blade between the switch body and the connector and then twist the screwdriver forcing the connector back off the switch. You may have to work from side to side till it backs off enough. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/19/2012(UTC) Posts: 2
|
Originally Posted by: denman Not sure what you are referring to. If you mean getting the connectors off the door latch switches often a flat screw driver of the correct size will do it. Put the driver blade between the switch body and the connector and then twist the screwdriver forcing the connector back off the switch. You may have to work from side to side till it backs off enough. Thank you! We got it.:D
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close