Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer will not cool down
Options
Go to last post Go to first unread
Model: LER 5636PO0 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
renegade_7  
#1 Posted : Sunday, April 8, 2012 5:20:01 PM(UTC)
renegade_7

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 6
At the end of the cycle, it just stays hot; what do I need to replace. I have the schematic.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Monday, April 9, 2012 7:06:56 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find a P00 are you sure it is not a PQ0.
The following is for a PQ0

Replacement parts for Whirlpool LER5636PQ0 29"ELECTRIC DRYER | AppliancePartsPros.com

See the attachment for the tech sheet. It includes a timing diagram.

Could be a couple things
Place timer at the ends of a cycle when cool down should happen.
Unplug the unit. Check the timer contacts BK/R.
They should be infinite ohms (open).
Be sure to disconnect the wires to one of the connectors when checking it. This prevents you from reading an alternate/parallel circuit path.

If OK
Remove both wire from the heating coil.
Check it with the meter, should be 8 to 12 ohms.
Then measure from each heating coil connector to a bare spot on the frame. Both should be infinite ohms.
If not then the element is grounded and always on.
THIS FORUM IS DEAD!!!!!!!
Back to top
renegade_7  
#3 Posted : Monday, April 9, 2012 7:08:33 PM(UTC)
renegade_7

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 6
Denman, you are right, it is PQ0. Thanks for the reply. I will check these things and get back to you. Perhaps by Saturday. I appreciate you taking the time to reply to my question. Bernie
Back to top
renegade_7  
#4 Posted : Monday, April 9, 2012 7:10:52 PM(UTC)
renegade_7

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 6
I will check on these things Saturday and get back to you. Thanks for taking the time to reply. Bernie
Back to top
ddavis263  
#5 Posted : Tuesday, April 10, 2012 7:08:07 AM(UTC)
ddavis263

Rank: Member

Groups: Registered
Joined: 6/24/2010(UTC)
Posts: 34
just had a dryer do the same thing to me. I replaced the heating coil and it solved the problem. Guess there was a short somwhere
Back to top
renegade_7  
#6 Posted : Tuesday, May 8, 2012 2:14:01 PM(UTC)
renegade_7

Rank: Member

Groups: Registered
Joined: 1/30/2012(UTC)
Posts: 6
Thanks guys, for the help. I changed the heating coil, which was broken. Works very well now. Great site, and thanks...
Back to top
Users browsing this topic
Guest (4)
Similar Topics
maytag electric dryer will not cool down (Dryer Repair)
by Ingo 11/9/2010 7:28:00 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET