Rank: Member
Groups: Registered
Joined: 3/5/2012(UTC) Posts: 1
|
The door on this dishwasher opens to far. Once open the door is past level with the floor. This creates a bump when rolling the bottom try in or out. Even when open this wide it does not feel solid. Is there a stop somewhere that I'm missing.
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: BaRW The door on this dishwasher opens to far. Once open the door is past level with the floor. This creates a bump when rolling the bottom try in or out. Even when open this wide it does not feel solid. Is there a stop somewhere that I'm missing. BaRW, There is a stop, but that is usually not the issue. You will need to dismantle the door assembly and check the door liner Part number: AP4057395
hinge attachment point and screws for distortion , bent , loose screws, etc. Then check the hinges and the pivot points on the tub frame for the same possible issues, Part number: AP3965273
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close